All Installation Instructions for Jenn-Air Range 88368

Customer:: Charles from Leighton, IA
Parts Used:: WP71002111
Difficulty Level:: Really Easy
Total Repair Time:: Less than 15 mins

Grease filter broke

Lifted the old one out and put the new one in. Very easy

Was this instruction helpful to you?

Customer:: Camille from Marietta, GA
Parts Used:: 700855K
Difficulty Level:: Easy
Total Repair Time:: 30 - 60 mins
Tools:: Screw drivers

Front burner elements had no temp control & only heated on full blast

I used process of elimination to figure out the issue with my 28 year old Jenn-Air cooktop. Issue: One day while cooking there was a loud pop & from then the front burner no longer had any temp control & only heated to full blast plus. Steps to fix: 1) Replaced the surface burner elements PS2195246 - this didn't fix the issue but they look nicer now. This was a simple plug in - no tools needed. 2) Replaced the grill side with a 2 burner plug in part PS1941381. Also simple plug in with no tools required. This didn't fix the isssue & I found that the front burner on the new unit also had no temp control. 3) Replaced the Surface Burner Receptacles for the 2 original burners PS1570190. This required turning off the breaker, removing the cooktop by unscrewing all the little screws & then cutting the old connections with wire cutters and wiring the new parts in with wire nuts & electrical tape. It took maybe half an hour but did not fix the issue. 4) Replaced the Surface Unit Infinite Switch Kit PS2076107 for the front 2 burners. Removed the screws just for the center control panel (after turning off the breaker) then took a picture of the wire configuration & removed the old parts by pulling (hard) at the connections until they unplugged. Put the new part in with the same wire placement. This finally fixed the issue & we now have 4 working burners for the first time in the >1 year that we have lived in this house.

Was this instruction helpful to you?

Customer:: Glenn W. from Lake Charles, LA
Parts Used:: 700855K
Difficulty Level:: Really Easy
Total Repair Time:: 15 - 30 mins
Tools:: Pliers, Screw drivers

The metal parts of the switches that the control knobs fit on broke on three of the switches.

I removed the two screws holding the control panel in place with a Phillips screwdriver, pulled the assembly of switches up, and found the number on the old switches. Amazingly on PartsSelect's website I found a picture of the exact switch with the exact same part number stamped on it. I ordered three new switches, and they arrived two or three days later. I removed the wires from the old switch with a pair of needle-nose pliers, reconnected them to the new switch in the exact same places, and had all three of them installed and working perfectly in about 45 minutes or an hour.

Was this instruction helpful to you?

Customer:: james from Santa Claus, IN
Parts Used:: 700855K
Difficulty Level:: A Bit Difficult
Total Repair Time:: 30 - 60 mins
Tools:: Pliers, Screw drivers, Wrench set

Surface burner did not heat

I ordered part one day, recieved part the next day. I installed it the next day. It worked perfect. THANK YOU!

Was this instruction helpful to you?

Customer:: Grant from Alexandria, VA
Parts Used:: 8009
Difficulty Level:: Really Easy
Total Repair Time:: Less than 15 mins

Light bulb failure

Received the part the day after ordering. Appreciated the quick service and repair took less than a minute.

Was this instruction helpful to you?

Customer:: Candace from Iowa Falls, IA
Parts Used:: WPY700854
Difficulty Level:: Really Easy
Total Repair Time:: Less than 15 mins

Needed to replace the burner knobs on my stove.

Great company....Fast delivery.

Was this instruction helpful to you?

Customer:: MaryAnn from Scituate, MA
Parts Used:: WP71002111
Difficulty Level:: Really Easy
Total Repair Time:: Less than 15 mins

Simply replace the grease filter

Thanks for carrying this part for my old stove. And thanks for the great service.

Was this instruction helpful to you?

Customer:: Christine from Pembroke, VA
Parts Used:: WP71002111
Difficulty Level:: Really Easy
Total Repair Time:: Less than 15 mins

Wanted to replace old grease filter

Removed old filter, dropped in new filter. A breeze! What was best of all, is that Parts Select shipped the filter immediately and it arrived within just a day or so! Well done!

Was this instruction helpful to you?

Customer:: Robert from Warroad, MN
Parts Used:: WP71002111
Difficulty Level:: Really Easy
Total Repair Time:: Less than 15 mins

Filter was old and discolored.

The new replacement grease filter came without damage and it was a simple task of removing the old and setting the new in it's place. No tools were required.

Was this instruction helpful to you?

Customer:: Nancy from laveen, AZ
Parts Used:: WP71002111
Difficulty Level:: Really Easy
Total Repair Time:: Less than 15 mins

needed to replace the grease filter

I lifted the grill off; took the old grease filter out and threw it away; placed the new filter in the well; put the grill back on. Wallah!!! just like new.

Was this instruction helpful to you?

Customer:: Lavonne from Hutchinson, MN
Parts Used:: WP71002111
Difficulty Level:: Really Easy
Total Repair Time:: Less than 15 mins

grease filter had holes

throw the old one in the garbage, drop in the new one. It is about 3/4" narrower than the one that came with the stove but still covers the down vent adequately

Was this instruction helpful to you?

88368 Jenn-Air Range - Instructions