Models > F101 > Instructions

F101 Jenn-Air Range - Instructions

Jump to:

All Instructions for the F101
91 - 105 of 255
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Customer:
Ricka from HOUSTON, TX
Parts Used:
WP715269
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Pliers, Screw drivers
No heat in vintage JennAir oven
The oven on the 40 year old JennAir range stopped heating. It took more time to locate the model number D120 and conduct part/price search than the time it took to install the correct oven bake element from PartSelect! We read all the comments posted by others. We did not remove oven door. The old element had only 2 screws instead of the 3 reported by many. We followed the sequence--Power off at box; unscrew old element; pull out about 3 inches; disconnect wiring; used telescoping mirror to assist; connect wiring to new element; position new element; install 2 new screws; turn on power; turn on oven -- SUCCESS -- heating better than before. Thank you PartSelect.
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Arthur H from Irving, TX
Parts Used:
WPY700854, 700855K
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Pliers
surface switch was bad
just swapped out the two switches
2 of 4 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Robert A from Farmington `, CT
Parts Used:
WPY700854
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Old Stove Top
Ordered new cartridges
1 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
RAYMOND from JACKSONVILLE, FL
Parts Used:
4396923
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
broiler pan missing
ordered new broiler pan
1 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Kathy from Dumas, TX
Parts Used:
JEA7000ADBA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
no problem
just wanted another set of burners before Thanksgiving or Christmas rolled around and all I have ever had was two plus the grill part of my Jenn-Air. But I did find your site very easy to use and the delivery was very prompt and the packaging was wonderful. I have bookedmarked your site so that if I need anything again for my kitchen I will look at you first.
1 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Keith from PICKERINGTON, OH
Parts Used:
A122BA
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Radiant cooktop unit died, needed to replace
Unpacked the new cooktop, plugged the module into the outlet. Done.
1 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Richard from THE WOODLANDS, TX
Parts Used:
700855K
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Pliers
Broken knob dhaft
Replaced wires from broken to new part.
1 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Anne from Bedford Hills,, NY
Parts Used:
WPY700854, 700855K
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Pliers, Screw drivers
Could Not Use One Burner
Turned power to stove off. Removed two screws from cover - lifted cover up and pulled switch out and disconnected wires. Put new switch in and connected wires. Made sure that it was in correct position by placing knob on to make sure off position was correct - then placed plate in position and closed - put two screws back on plate and put new knob on. Turned power back on and turned knob and burner back in operation
1 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Edgar from Montgomery, IL
Parts Used:
WP715269
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
super old Jenn-Air range needed an element
Pulled out the old one-couldn't find it ANYWHERE that was a comparable match except for partselect. shut off breaker to oven-put in the new one-hard to reach in due to limited space and hard to see due to sticking your head in an oven.used a mirror/flashlight to see behind element to unscrew and screw it back in.Other than space restriction and light-pretty easy. Works great! Thanks for HAVING the part!! :)
1 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Lenice from Stuart, FL
Parts Used:
WPY700854
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
Elec. stove-top knobs (imprinted with HI to LO numbers 1 to 10)worn to non-readable.
Knobs sent fit the shafts, but due to molded internal stop wouldn't seat. Had to drill out the stop, and also file down the shafts a bit for knobs to seat acceptably closer to stove-top.
1 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Dave from Bloomingburg, NY
Parts Used:
WPY700854
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
knobs were getting hard to read.
Pulled old knobs off, pressed new ones on. Probably well under a minute for 6 knobs. Anyone with the IQ of a horseradish could have done it. But what was really great was the help and personality of the agent at the other end of the phone. Shipping was as promised, and the entire experience was delightful!
1 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
WALTER from EL CAJON, CA
Parts Used:
WPY700854
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
old nkobs old and discolored
took old knobs off replaced in 3 minutes
1 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Isam from Irving, TX
Parts Used:
JEA7000ADBA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
The paint on the very old cartridge peeled off
It was so easy. I just unplugged the old catridge and plugged the new one. Thanks for the fast and great service at a competetive price. I am a very satisfied customer who will definitely be returning and recommending your service.
1 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Michael from Cincinnati, OH
Parts Used:
JEA7000ADSA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
elements were worn and not heating properly
Repair was very easy for anyone to do,Just lift the old element cartridge up and pull out,And insert new the one! Very simple it took less than two minutes.The New element cartridge(stainless steel) Fits perfectly and functions perfectly.Ordered parts on a Saturday and they arrived Monday! impressive!!
1 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Alan from Salem, OR
Parts Used:
JEA7000ADSA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
elements did not work
Take cartridge out of box, slide into slot, done.
1 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
All Instructions for the F101
91 - 105 of 255