RB788*T1 Hotpoint Range - Instructions
Jump to:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- PIPER from DECATUR, GA
- Parts Used:
- WB44X5082
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Socket set
bake element burned out
First I removed the two screws that hold the element in place. I then pulled the element out about 3 inches and disconnected the two wires. Then I replaced it with the new element that took only two days to arrive and that was without paying extra express shipping fees. It couldn't have been easier. I didn't even wait for my husband to come home and install it. I had an oven-baked meal ready when he got home. I was very satisfied.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Merle from Hainesport, NJ
- Parts Used:
- WB44X5082
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Nutdriver, Screw drivers
Over took forever to come to temperature
My daughter and I turned off the breaker to the range and removed the old element and replaced it with the new one. My husband came home and took over after we had done almost everything ourselves!!
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Michael from Eastchester, NY
- Parts Used:
- WB44X5082
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Nutdriver
Element Sparked then split on the left side
Unpluged Stove, Unscrewed the wires attached to the Element in the back of stove after I removed the cover. Removed the two screws that held the Element at the back of the oven compartment. Then replaced the Element with the new one and put back the screws, the wires and the cover in the same sequence iI took it apart. Plugged it back in works like new!
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Karen from Xenia, OH
- Parts Used:
- WB44X5082
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Socket set
Baking element burned out.
My husband removed the screws holding the element, disconnected the wires from the old element. He then reattached the wires to the new element, putting it back into place, tightened the screws, and we were cooking again. The shipping service was GREAT! I ordered the part on-line and it arrived next day! Thanks!
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Brian from Havertown, PA
- Parts Used:
- WB44X5082
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers, Socket set
original oven element broken, lack of heat
I removed the original element with socket set (two hex nuts). I removed the element and face plate, reversing the steps when installing the new element. It was simple.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Dave from Lincoln, NE
- Parts Used:
- WB44X5082
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
Awesome
Ordered on monday and arrived and installed on tuesday. Works great!
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Thomas from Waynesboro, PA
- Parts Used:
- WB44X5082
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers, Socket set
Heating element got so hot im one spot that it starter to burn.
Got on line, found the correct part and ordered it. The part came in about three days. Removed two screws and removed teh element. Two additional screws were removed from the power wires once the element was removed. Very simple to replace.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Linda from Watertown, SD
- Parts Used:
- WB44X5082
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Heating element went out on our 39 year old stove.
We just took out the old one and put in the new. Works great!!
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- John from High Point, NC
- Parts Used:
- WB44X5082
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Nutdriver, Screw drivers
Bake element burned out
I first looked at a video PartSelect had done on replacing the bake element in a stove. I disconnected the stove's power plug from the wall, removed the baking shelves, and removed screws holding the cover plate for the old bake element with a nutdriver. I removed the two screws holding the power wires to the bake element and replaced the bake element with the new element purchased from PartSelect. The cover plate was repositioned by using the nutdrive to tighten the cover plate screws. After reinstalling the bake shelves and plugging the oven back in, the repair was finished.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Michael L. from Auburndale, FL
- Parts Used:
- WB44X5082
- Difficulty Level:
- Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Socket set
Bottom element burned out
I have some electrical experience. It was simple to remove and install. You just have to pay attention to wiring upon removal and installation.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Charles from Bethlehem, PA
- Parts Used:
- WB44X5082
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers, Wrench set
bake element in oven burned out
Removed old element from back of oven with closed wrench and removed wires from element with screwdriver. Took me longer to find screwdriver than to install part. Finding part and ordering it was a snap. Got part in day and half. Great service and price. This is the place for parts and instructions. Will definitly use it again. My wife thinks I'm a genious. Thanks PARTSELECT.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Halimah from Charlotte, NC
- Parts Used:
- WB44X5082
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Pliers, Screw drivers
Bake element burned out.
My son used a screw driver and needle nose pliers to remove the old element. He then slide the new element on, put the screws in and he was done.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Peter from Las Vegas, NV
- Parts Used:
- WB44X5082
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Nutdriver, Screw drivers
burnt out bake element
This was a simple repair. Be sure to turn breaker to stove off before you start. Then remove two small screws holding element to back of stove, pull out element and disconnect two wires and remove. Reverse the steps for installation.Very simple
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Stephan from Gladstone, MO
- Parts Used:
- WB44X5082
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Nutdriver, Screw drivers
Replace the large heating element.
It would have gone with ease but the screws holding the element to the conductors were not original. Once those were removed, we were able to use the screws included and were done in 5 minutes.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- suzanne from crofton, MD
- Parts Used:
- WB44X5082
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Nutdriver, Pliers
Heating element in oven gave up on Monday before Thanksgiving.
Totally pleased! I ordered the part Monday evening, and it was delivered Wednesday morning. Awesome! Was able to change the part in about 15 minutes. Thanksgiving was a success! Part Select saved my Thanksgiving! Highly recommend :) Thank you!
Was this instruction helpful to you?
Thank you for voting!