RGB745DEP4CT Hotpoint Range - Parts

This part is the replacement electronic control board for your gas range. It is approximately 11 inches by 4 inches. The control board monitors the temperature and allows you to control the oven heat....

The igniter does not come with wire nuts. *** Please NOTE: The igniter connector may need to be cut off and wires spliced to the range wiring with the porcelain wire nuts.

This bottom oven and deflector assembly is a durable metal panel designed to fit beneath the oven floor, protecting the bake element from spills while promoting even heat distribution for consistent c...

Replace your broken or missing oven door handle with this black plastic version, measuring 30" long and 1.5" wide. It attaches to the oven door for easy opening and is sold individually. Direct from t...

This is the replacement front surface burner tube and orifice for your gas range. You will find the orifice under the cooktop, beneath the burner. This part supplies fuel from the gas line to the stov...

This orifice spud changes the burner from natural gas to liquid propane. This orifice is sold individually. Size: .89MM

This oven temperature sensor helps maintain accurate heat by measuring the internal temperature and sending signals to the control board. If your oven is not heating properly or cooking unevenly, this...

Switching your GE stove from natural gas to propane? This orifice spud helps make that change safely and smoothly—especially for the right rear burner. It’s built to fit select models and helps your s...

Sold individually. This knob can accept a D-shaped shaft.