RS46*03 Hotpoint Range - Instructions
Jump to:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- thomas from palm coast, FL
- Parts Used:
- WB44X5082
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Nutdriver, Screw drivers
the existing element would not heat up, it was broken
turned off the electric at the breaker box.
removed the door, and racks. unscrewed two bolts, pulled out and unscrewed the leads. reattached the leads, and pushed in and reattached the element.
put the racks and door back on. turned on the electric and then tested the oven. easy!!
removed the door, and racks. unscrewed two bolts, pulled out and unscrewed the leads. reattached the leads, and pushed in and reattached the element.
put the racks and door back on. turned on the electric and then tested the oven. easy!!
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Karen from Xenia, OH
- Parts Used:
- WB44X5082
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Socket set
Baking element burned out.
My husband removed the screws holding the element, disconnected the wires from the old element. He then reattached the wires to the new element, putting it back into place, tightened the screws, and we were cooking again. The shipping service was GREAT! I ordered the part on-line and it arrived next day! Thanks!
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Brian from Havertown, PA
- Parts Used:
- WB44X5082
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers, Socket set
original oven element broken, lack of heat
I removed the original element with socket set (two hex nuts). I removed the element and face plate, reversing the steps when installing the new element. It was simple.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- pierre from virginia Beach, VA
- Parts Used:
- WB44X5082
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers, Wrench set
Electric Burner In oven failed
Parts arrived quickly and install was easy as removing two screws and removing the broken burner. Installed the new and I was done!
Was this instruction helpful to you?
Thank you for voting!
Old and corrosive due to age
After receiving parts, was getting rims unpackaged and removing the old rims, then and installing the new ones. Extremely easy to do. No tools needed
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Courtney from Coon Rapids, IA
- Parts Used:
- WB44X5082
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Nutdriver, Screw drivers
Blown Baking Element
The old part was easily removed with a nut driver, and the new element went right in with a nut driver and screwdriver.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Charles from Fairfax, VA
- Parts Used:
- WB44X5082
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
Cracked Heating Element (lower)
Unplugged oven. Removed the two screws from inside the oven that secured element to the back. I then removed the protective cover for the plug from behind the oven-three screws. Disconnected the element from the electrical wires, removed and replaced the element. And reassembled the cover and all the screws in reverse order. Plugged it in. Presto, 5 mins and works great.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Louis from Fairfield, CA
- Parts Used:
- WB44X5082
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Nutdriver, Screw drivers
The original heating element was broken.
The new element arrived in just 2 days with normal postage. I followed the simple instructions and was cooking 15 minutes later. It couldn't have been easier. Thanks.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Sally from Ravenswood, WV
- Parts Used:
- WB44X5082
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Nutdriver
Element replaced
It was quite easy-hooked up the wires replaced screws to hold it in place-finished!
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Fernando from Auburn, GA
- Parts Used:
- WB44X5082
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Nutdriver
Burned out oven element
Remove two screws that secure the plate to the oven wall. Pull element out about 6 inches, then remove two screws that attach the element to power lines. Reverse for installation. Very easy.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Frank from Bartlett, IL
- Parts Used:
- WB44X5082
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Nutdriver, Screw drivers
heating element split
I was able to slide the stove out from the wall, so it was easier to remove the back cover and disconnect the wiring in back rather than trying to reach into the oven. Then all I had to do was put in the new coil, reconnect the wires and slide the stove back into place.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Merle from Hainesport, NJ
- Parts Used:
- WB44X5082
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Nutdriver, Screw drivers
Over took forever to come to temperature
My daughter and I turned off the breaker to the range and removed the old element and replaced it with the new one. My husband came home and took over after we had done almost everything ourselves!!
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Sherry from Keller, TX
- Parts Used:
- WB44X5082
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Oven heating element burned out
I was very pleased with all the follow up from the time of order until the arrival of the heating element. I have never had the personal communication as I did with your company. The part was ordered on Dec. 26th and arrived on Dec. 29th. Due to the holiday schedule, I did not expect arrival until weeks end. My neighbor installed the heating unit for me and it is doing just fine.
Thank you for the excellent service.
Sherry Shelton
Thank you for the excellent service.
Sherry Shelton
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- John from Naperville, IL
- Parts Used:
- WB44X5082
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers, Socket set
Oven was uneven in temperature
Removed the bracket holding the element, slid out the element, disconnected it from the leads, replaced it with your part and reassembed. Oven now works like new.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Teresa from Grand Foks, ND
- Parts Used:
- WB44X5082
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Nutdriver, Screw drivers
oven element cracked apart, oven would not heat
1-Shut off the breaker
2-Pulled off the oven door for easier access
3-Unscrewed the old element plate
4-Unscrewed the red and black wires from the old element
5-Screwed on the new element to the wires
6-Replaced the screws on the new element plate
7-Turned the power back on
2-Pulled off the oven door for easier access
3-Unscrewed the old element plate
4-Unscrewed the red and black wires from the old element
5-Screwed on the new element to the wires
6-Replaced the screws on the new element plate
7-Turned the power back on
Was this instruction helpful to you?
Thank you for voting!