Models > RB525BH3CT > Instructions

RB525BH3CT Hotpoint Range - Instructions

Jump to:

All Instructions for the RB525BH3CT
121 - 135 of 200
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Customer:
Mary Ann from Granby, CT
Parts Used:
WB02K10062
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
Plastic glide broke
The person I spoke to knew exactly what I was trying to describe. The part arrived in 2 days. 5 minutes later the drawer was back in place. I was glad I save the screw as the part did not come with one.
Was this instruction helpful to you?
Thank you for voting!
Customer:
David from Alice, TX
Parts Used:
WB30X46987
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Nutdriver
Burned out heating element
took 5 minutes with a nut driver and son. I had previously watch your video and went exactly as the video described and showed.
Was this instruction helpful to you?
Thank you for voting!
Customer:
DAVID from PARIS, MI
Parts Used:
WB30X46987
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
the bottom element of the oven was broken
attached the element,pushed it back in the pocket,put the plate back on, screwed the nut and bolt back on and was done in less than 4 minutes!!
Was this instruction helpful to you?
Thank you for voting!
Customer:
Lori from Bellows Falls, VT
Parts Used:
WB30X46987
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Nutdriver
heating element blew apart
I watched the video on this website and it couldn't have been easier. The only thing I did differently was I took the door off for an easier reach. To take the door off, you open just a little and pull up. It makes it so much easier to get at the screws, and maked the repair a snap.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Sunny from Salt Lake City, UT
Parts Used:
WB31T10011, WB31T10010
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
stained drip bowls
unplugged burners replaced drip bowls plugged in burners
Was this instruction helpful to you?
Thank you for voting!
Customer:
Greg from Chicopee, MA
Parts Used:
WB30X46987
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Socket set
Bake Element burnt out
watched the video on part select - took less time then they said.
Was this instruction helpful to you?
Thank you for voting!
Customer:
James from Apache Junction, AZ
Parts Used:
WB31T10011, WB31T10010
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
old,burned pans
replaced
Was this instruction helpful to you?
Thank you for voting!
Customer:
Emily from Snoqualmie Pass, WA
Parts Used:
WB30X46986
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Nutdriver
Broiler Element Replacement
There were two small screws at the back of the stove (this was the part that intimidated me. At first glance it doesn't look like it should be removed). But you just have to unscrew them, disconnect the wires behind them (this part can be done by hand), and pull the element out. The new element slides right in! Just make sure the power to the stove is disconnected either by breaker or by unplugging it. I'm not sure if it matters, but I made sure to connect the wires to the same side of the element that they were removed from.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Stuart from Yelm, WA
Parts Used:
WB30X46987
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Nutdriver
Heating element not working
Saw the brief video and as stated took less than five minutes to replace. It took longer to clean up the floor under the oven than to replace heating element.
Was this instruction helpful to you?
Thank you for voting!
Customer:
mary from morton, WA
Parts Used:
WB30X46987
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Nutdriver
burned out
replaced
Was this instruction helpful to you?
Thank you for voting!
Customer:
Johnette from Baltimore, MD
Parts Used:
WB48T10095
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
no racks to oven
Easily glide in.
Was this instruction helpful to you?
Thank you for voting!
Customer:
John from Denham Springs, LA
Parts Used:
WB24T10027
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
Open Switch
Pull knob. Pull wires. Pull two screws. Replace switch
Was this instruction helpful to you?
Thank you for voting!
Customer:
Greg from Ft. Washington, PA
Parts Used:
WB02K10254
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
needed to unstall "anti tilt" bracket on back of electric range to be code compliant for property..
Turned off circuit breaker, Then pulled out range, straight out and away from wall and cabinets. Layed braket on flooring and moved stove back in to make certain it aligned with range rear stands. Moved range back out, marked holes in braket, screwed in screws to anchor bracket. Pushed range back into placed against wall. Tried to |"tilt" range by pulling down on door after opened - range was held in place sre
Was this instruction helpful to you?
Thank you for voting!
Customer:
Richard from Bainbridge, NY
Parts Used:
WB31T10011, WB31T10010
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
dirty bowls
used my hands to remove heating element, then remove drip bowls, then install new bowls, then install heating elements, done!!!!!
Was this instruction helpful to you?
Thank you for voting!
Customer:
Nancy from Mead, CO
Parts Used:
WB31T10011, WB31T10010
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Replaced my drip pans
The new drip pans are great. I had purchased generic ones locally that were supposed to be universal. The problem was that they did not fit right and the burner coils did not sit flat. The new drip pans fit well and look great too.
Was this instruction helpful to you?
Thank you for voting!
All Instructions for the RB525BH3CT
121 - 135 of 200