RGB533CEH4CC Hotpoint Range - Parts

This is the replacement burner cap for your gas range. It is made of gray plastic and is approximately 3 inches in diameter. It has 3 small tabs on the bottom, with one tab that is larger than the oth...

This bottom oven and deflector assembly is a durable metal panel designed to fit beneath the oven floor, protecting the bake element from spills while promoting even heat distribution for consistent c...

This item no longer comes with the igniter.

This is the replacement front surface burner tube and orifice for your gas range. You will find the orifice under the cooktop, beneath the burner. This part supplies fuel from the gas line to the stov...

This is a set of 4 black burner caps.

This orifice spud changes the burner from natural gas to liquid propane. This orifice is sold individually. Size: .89MM

Overlay must be ordered separately.

Switching your GE stove from natural gas to propane? This orifice spud helps make that change safely and smoothly—especially for the right rear burner. It’s built to fit select models and helps your s...

The purpose of the safety valve is to make sure that no gas is released until the igniter gets enough power to ignite the gas range. The purpose of the pressure regulator is that it automatically cut...

This economic nut is a manufacturer-approved replacement part for your oven range. The nut can become worn down or stripped over time and need replacing. Make sure to disconnect power to the unit and ...