All Installation Instructions for Hotpoint Range RB753BC2AD

Customer:: Marcus from Lagrange, GA
Parts Used:: WB30X46987
Difficulty Level:: Really Easy
Total Repair Time:: Less than 15 mins
Tools:: Pliers

Broken bake element

Very easy to install save several dollars

Was this instruction helpful to you?

Customer:: Greg from Ft. Washington, PA
Parts Used:: WB02K10254
Difficulty Level:: Really Easy
Total Repair Time:: Less than 15 mins
Tools:: Screw drivers

needed to unstall "anti tilt" bracket on back of electric range to be code compliant for property..

Turned off circuit breaker, Then pulled out range, straight out and away from wall and cabinets. Layed braket on flooring and moved stove back in to make certain it aligned with range rear stands. Moved range back out, marked holes in braket, screwed in screws to anchor bracket. Pushed range back into placed against wall. Tried to |"tilt" range by pulling down on door after opened - range was held in place sre

Was this instruction helpful to you?

Customer:: charles from ft.pierce, FL
Parts Used:: WB31T10011, WB31T10010
Difficulty Level:: Really Easy
Total Repair Time:: Less than 15 mins

Rusted out burnner bolws

Remove old burnner bolws and install new ones

Was this instruction helpful to you?

Customer:: Richard from Richmond, TX
Parts Used:: WB17T10006
Difficulty Level:: Really Easy
Total Repair Time:: Less than 15 mins
Tools:: Nutdriver, Pliers

GE Electric Range rear left burner quit coming on

Removed the back top cover with 1/4" nutdriver. Removed the burner terminal block with 1/4" nutdriver. Within 15 minutes had the terminal block kit removed and installed and in service.

Was this instruction helpful to you?

Customer:: Gloria from Dallas, TX
Parts Used:: WB31T10011
Difficulty Level:: Really Easy
Total Repair Time:: Less than 15 mins

Needed to replace drip bowls

Husband just snapped in place in about 8 seconds! Thanks for the fast delivery and pleasant staff assistant.

Was this instruction helpful to you?

Customer:: Patricia from Centereach, NY
Parts Used:: WB31T10011, WB31T10010
Difficulty Level:: Really Easy
Total Repair Time:: Less than 15 mins

needed new drip bowls for stovetop GE

removed the burners and dropped the drip bowls in. Very easy to do,

Was this instruction helpful to you?

Customer:: Thomas from Hamilton, VA
Parts Used:: WB30X46987
Difficulty Level:: Really Easy
Total Repair Time:: Less than 15 mins
Tools:: Nutdriver, Pliers

Old bake element burned out

Turned off circuit breaker, removed screws holding old element in with nut drivers, pulled out old element about 3-4" to reach terminals connected to back of element, removed spade lug terminals with needle nose pliers. Reconnected terminals to new element and screwed new element in place with nut drivers. Turned on circuit breaker and oven. New element works perfectly. Took about 8-10 minutes. Very easy to do.

Was this instruction helpful to you?

Customer:: Richard from Bainbridge, NY
Parts Used:: WB31T10011, WB31T10010
Difficulty Level:: Really Easy
Total Repair Time:: Less than 15 mins

dirty bowls

used my hands to remove heating element, then remove drip bowls, then install new bowls, then install heating elements, done!!!!!

Was this instruction helpful to you?

Customer:: Maria T from Germantown, MD
Parts Used:: WB31T10010, WB30K10002
Difficulty Level:: Really Easy
Total Repair Time:: Less than 15 mins

Burned heating coil

Just pulled old coil out of the plug. Replaced drip bowl and inserted new coil in. No problem.

Was this instruction helpful to you?

Customer:: DAVID from PARIS, MI
Parts Used:: WB30X46987
Difficulty Level:: Really Easy
Total Repair Time:: Less than 15 mins

the bottom element of the oven was broken

attached the element,pushed it back in the pocket,put the plate back on, screwed the nut and bolt back on and was done in less than 4 minutes!!

Was this instruction helpful to you?

Customer:: Lori from Bellows Falls, VT
Parts Used:: WB30X46987
Difficulty Level:: Really Easy
Total Repair Time:: Less than 15 mins
Tools:: Nutdriver

heating element blew apart

I watched the video on this website and it couldn't have been easier. The only thing I did differently was I took the door off for an easier reach. To take the door off, you open just a little and pull up. It makes it so much easier to get at the screws, and maked the repair a snap.

Was this instruction helpful to you?

Customer:: David from Alice, TX
Parts Used:: WB30X46987
Difficulty Level:: Really Easy
Total Repair Time:: Less than 15 mins
Tools:: Nutdriver

Burned out heating element

took 5 minutes with a nut driver and son. I had previously watch your video and went exactly as the video described and showed.

Was this instruction helpful to you?

Customer:: Heidi from Carrollton, TX
Parts Used:: WB15X10047
Difficulty Level:: Really Easy
Total Repair Time:: Less than 15 mins

Oven Door Handle Broke

The repair was very easy. It did require a very small torx driver (I can't remember the size off hand.) and a 1/4" nut driver.

Was this instruction helpful to you?

Customer:: James from Apache Junction, AZ
Parts Used:: WB31T10011, WB31T10010
Difficulty Level:: Really Easy
Total Repair Time:: Less than 15 mins

old,burned pans

replaced

Was this instruction helpful to you?

Customer:: Emily from Snoqualmie Pass, WA
Parts Used:: WB30X46986
Difficulty Level:: Really Easy
Total Repair Time:: Less than 15 mins
Tools:: Nutdriver

Broiler Element Replacement

There were two small screws at the back of the stove (this was the part that intimidated me. At first glance it doesn't look like it should be removed). But you just have to unscrew them, disconnect the wires behind them (this part can be done by hand), and pull the element out. The new element slides right in! Just make sure the power to the stove is disconnected either by breaker or by unplugging it. I'm not sure if it matters, but I made sure to connect the wires to the same side of the element that they were removed from.

Was this instruction helpful to you?

RB753BC2AD Hotpoint Range - Instructions