CEC2M4WSAB Gibson Range - Instructions
Jump to:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- Richard from Virginia, MN
- Parts Used:
- 5303051519
- Difficulty Level:
- Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
Burnt Out Bake Element
1. Remove two screws securing element to rear wall of oven. 2. Carefully pull element forward until you have access to the wires attached to the element. 3. Carefully pull the push-on connectors from the element. 4. Push wires onto new element. 5. Carefully push element back into oven wall and secure with screws.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Kelly from Lawrenceburg, IN
- Parts Used:
- 5303051519
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Socket set
My oven bake element stopped working.
It was too simple. I unplugged the oven. Unscrewed the old element. Disconnected the wire plugs from the element. Plugged the new element in to the two wires and screwed the new element in to the back of the oven. DONE! There are several Youtube videos that document this process if you want the visuals.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Melissa from Greensburg, PA
- Parts Used:
- 5303051519
- Difficulty Level:
- Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Nutdriver
The heating element in the oven broke in two.
Removed the old element by removing two screws and pulling the ends through the back wall. Removed the wires simply by unplugging them. Plugged wires into new element, put back through back wall and secured with 2 screws.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Deborah from Wetumpka, AL
- Parts Used:
- 5303051519
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
Bake element burned out
The appliance repair service had never heard of this old brand, but I was able to order this and have it shipped at a more economical price than any other appliance parts service. All the repair service had to do was to walk in and install.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- THOMAS from WAYNESVILLE, NC
- Parts Used:
- 5303051519
- Difficulty Level:
- Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Nutdriver, Pliers
Stove wires were not long enough.
Required taking back of stove off to properly extend the wires to plug in the new element as well as crimping existing plugs to obtain a secure contection.
Was this instruction helpful to you?
Thank you for voting!