JP301BN4BC General Electric Range

I opened the lid, and found that the terminal blocks were burnt, the wires were melted. I ordered one set of terminal block to replace the burnt one, and it worked. Before I started, I shut off the electricity in the whole house to be safe.

TURN OFF ALL POWER TO KITCHEN. Took off all burner coils and plates below them. Lift hood. Locate part. Remove old part and replace with new part in same way as was previously installed. The wire that comes with the kit is actually too much wire, but just arrange it the best you can and leave it....no big deal. I didn't have a magnet ... Read more , but needed one. The wire from burner coil to switch runs through a harness which is screwed on to the body of the oven (below the range). Be careful NOT to drop it behind oven when taking it out. I dropped it and took forever to get it. That turned a 20 minuate job into an hour and a half. Otherwise this is an easy job that anyone can do. Refrigerator compressor is next. Have fun.

Our glass electric cooktop is more than 15 years old, but it works like a champ. The problem is that the knobs have become almost unreadable. We considered buying a replacement unit for hundreds of dollars, but first I checked PartSelect.com and found the knobs! I ordered them, they came, I removed the old ones and put on the new ones. ... Read more No tools needed and the cook top looks like new! You saved the day! Thanks!