JKP26G02 General Electric Range - Instructions

Got on line, found the correct part and ordered it. The part came in about three days. Removed two screws and removed teh element. Two additional screws were removed from the power wires once the element was removed. Very simple to replace.

We just took out the old one and put in the new. Works great!!

DISCONNECT POWER !!!! Removed 2 screws to get element loose from rear wall of oven and 2 srews to remove wires. Reverse for installation. The replacement part fit perfectly and works just fine.

Removed bolts from fixing plate, pulled out existing element, unscrewed wire connectors and installed new element in reverse order of removal. This is an old stove from the 60's or 70's so I was glad to get a replacement part and fit it myself so easily.

I first looked at a video PartSelect had done on replacing the bake element in a stove. I disconnected the stove's power plug from the wall, removed the baking shelves, and removed screws holding the cover plate for the old bake element with a nutdriver. I removed the two screws holding the power wires to the bake element and replaced the bake element with the new element purchased from PartSelect. The cover plate was repositioned by using the nutdrive to tighten the cover plate screws. After reinstalling the bake shelves and plugging the oven back in, the repair was finished.

I have some electrical experience. It was simple to remove and install. You just have to pay attention to wiring upon removal and installation.

Simply removed the old part and istalled the new one with 2 nuts and 2 screws. It helps to know what the problem is. That comes with life experience.

Remove two screws that secure the plate to the oven wall. Pull element out about 6 inches, then remove two screws that attach the element to power lines. Reverse for installation. Very easy.

Replaced old bake element with new one. 4 small screws/nuts. From order to fix was 3 days. My wife was impressed.

Went on line to find the part number and ordered the part. It came in the mail two days later and I installed in about five minutes.

Very easy to replace. Oven works like new again. If you have even the most basic visual and mechanical ability, you will be fine to do this on your own. Total repair time for me was less than 5 minutes. The part was an exact fit!

Took the old one out, measured it, ordered the appropriate size, intalled the new one.

I was very pleased with all the follow up from the time of order until the arrival of the heating element. I have never had the personal communication as I did with your company. The part was ordered on Dec. 26th and arrived on Dec. 29th. Due to the holiday schedule, I did not expect arrival until weeks end. My neighbor installed the heating unit for me and it is doing just fine.

Thank you for the excellent service.

Sherry Shelton

I was able to slide the stove out from the wall, so it was easier to remove the back cover and disconnect the wiring in back rather than trying to reach into the oven. Then all I had to do was put in the new coil, reconnect the wires and slide the stove back into place.

Firstly a big thanks to Parts Select.com I order the part on a Monday and it was delivered on the Wednesday of the same week!

Firstly I pulled the stove out of the space between the counter tops. Next I unplugged the stove. I opened the oven door unscrewed the two screws holding the element onto the back of the oven. Next I unscrewed the two screws that fastened the wires onto the two ends of the element. The element was then able to be removed from the oven. I then fitted the new element by repeating the same procedures to take the element out. The whole process took me less than 15 minutes.