Models > JCBP35DM1BB > Instructions

JCBP35DM1BB General Electric Range - Instructions

Jump to:

All Instructions for the JCBP35DM1BB

Customer:: John from Woodbridge, VA
Parts Used:: WB25T10041
Difficulty Level:: Really Easy
Total Repair Time:: Less than 15 mins
Tools:: Pliers, Screw drivers

Orange light "Hot Stovetop" lense broke off.

Parts arrived in record time and the right parts. The detailed diagram was so helpful in finding exactly the part I needed to order. Was so easy my girlfriend with no mechanical or electrical experience completely helped me through the entire project. She secured the electrical breaker to the range, and I had the top back to the oven removed. I showed her how the little white box simply slides off the lens cover, then replaced the new one in the holes and slide it back on. Secured the back and she turned on the breaker back on...and all lights work. Thanks for making this project easy, simple and quick.

Was this instruction helpful to you?

Customer:: Greg from Ft. Washington, PA
Parts Used:: WB02K10254
Difficulty Level:: Really Easy
Total Repair Time:: Less than 15 mins
Tools:: Screw drivers

needed to unstall "anti tilt" bracket on back of electric range to be code compliant for property..

Turned off circuit breaker, Then pulled out range, straight out and away from wall and cabinets. Layed braket on flooring and moved stove back in to make certain it aligned with range rear stands. Moved range back out, marked holes in braket, screwed in screws to anchor bracket. Pushed range back into placed against wall. Tried to |"tilt" range by pulling down on door after opened - range was held in place sre

Was this instruction helpful to you?

Customer:: Judith from Broadway, VA
Parts Used:: WB31T10015, WB31T10014
Difficulty Level:: Really Easy
Total Repair Time:: Less than 15 mins

slot that heating element fits was worn down and caused burners to be uneven

replaced with new ones

Was this instruction helpful to you?

Customer:: Patricia from Brandenburg, KY
Parts Used:: WB08T10026
Difficulty Level:: Really Easy
Total Repair Time:: Less than 15 mins
Tools:: Nutdriver, Pliers

Oven light wire broken, damaged socket

Remove light bail, glass cover held by two nut screws. Pull socket, removed clips in back, replaced wire connectors, placed new socket in, then glass cover and bail. Wire connected in back, cover plate replaced.

Was this instruction helpful to you?

Customer:: ROBERT from MECHANICSBURG, PA
Parts Used:: WB31T10015
Difficulty Level:: Really Easy
Total Repair Time:: Less than 15 mins

Replaced All Burner Receptacles After One Failed And Also Replaced Ball Burner Bowls

This installation was for a replacement for one of the burner bowls on the original order. Replacement bowl fits proiperly.

Was this instruction helpful to you?

Customer:: Raymond from Highland, MI
Parts Used:: WB30X46986
Difficulty Level:: Really Easy
Total Repair Time:: 15 - 30 mins
Tools:: Pliers, Socket set

broiler element burned completely out

Moved stove out away from wall .Unplugged stove, turned gas off. Unit is a dual fuel convection. Burners are gas, oven is electric. Removed 4 screws from back shield and exposed the 2 electrical leads connected to broiler element. Disconnected the electrical .Inside oven I removed the front bracket holding element in place, then removed the 2 1/4 screws in the back holding element in place. placed new element in and finger tightened the 2 screws, next I installed the front bracket and finger tightened those. I then snugged the rear screws in followed by the front. I went to the back and reconnected the 2 electrical leads. Replaced back shield and plugged unit in and turned gas back on.Caution; Make sure your gas line is flexible before moving your stove out to far. Repair was very easy

Was this instruction helpful to you?

Customer:: daniel from gap, PA
Parts Used:: WB21X22134
Difficulty Level:: Easy
Total Repair Time:: 15 - 30 mins
Tools:: Nutdriver, Screw drivers

f-2 or f-3

remove two bolts in on sensor and slip thru back un plug and reverse to put in

Was this instruction helpful to you?

Customer:: lynn from sunnyside, NY
Parts Used:: WB21X22134
Difficulty Level:: Really Easy
Total Repair Time:: 15 - 30 mins
Tools:: Nutdriver, Pliers

F2 reading

Followed the instructions that were sent to me by E-Mail.

Was this instruction helpful to you?

Customer:: Daryl from Savannah, TN
Parts Used:: WB27X45466
Difficulty Level:: Really Easy
Total Repair Time:: Less than 15 mins
Tools:: Nutdriver, Pliers

Bad control board

Removed top back plate of oven. unpluged all of the wiring plugs on the control board. Removed two screws on the control board. Removed face plate from old control board and put it on the new control board. Atteched new board with the two screws. Connected all of the plugs to new board ( all plugs are color coded to board). Re-installed oven back plate. Pluged oven in. Works great.

Was this instruction helpful to you?

Customer:: Kenneth from Salem, OR
Parts Used:: WB21X22134
Difficulty Level:: Really Easy
Total Repair Time:: Less than 15 mins
Tools:: Nutdriver

Flashing F2 and erratic temperature readings.

Unplugged from wall outlet, then opened oven front door. Reached in and removed two screws. Pulled oven sensor threw and detached electrical connector from old sensor. Plugged in new oven sensor and reversed removal procedure. No more Flashing F2 and oven temperature came to ready. Very easy.

Was this instruction helpful to you?

Customer:: jud from gatesville, TX
Parts Used:: WB21X22134
Difficulty Level:: Really Easy
Total Repair Time:: Less than 15 mins
Tools:: Nutdriver

F2 error code

Really easy fix. Unplug oven. With a 5/16 nut driver take the 5 screws out of the center long tin cover and remove. Unplug little white temperature sensor plug located between broil heating element. Open oven door and remove one screw holding temp. sensor using same nut driver and simply pull out old sensor. Install new sensor. It's that easy. No more f2 been working like a champ!!!

Was this instruction helpful to you?

Customer:: Mary Ann from Granby, CT
Parts Used:: WB02K10062
Difficulty Level:: Really Easy
Total Repair Time:: Less than 15 mins
Tools:: Screw drivers

Plastic glide broke

The person I spoke to knew exactly what I was trying to describe. The part arrived in 2 days. 5 minutes later the drawer was back in place. I was glad I save the screw as the part did not come with one.

Was this instruction helpful to you?

Customer:: Emily from Snoqualmie Pass, WA
Parts Used:: WB30X46986
Difficulty Level:: Really Easy
Total Repair Time:: Less than 15 mins
Tools:: Nutdriver

Broiler Element Replacement

There were two small screws at the back of the stove (this was the part that intimidated me. At first glance it doesn't look like it should be removed). But you just have to unscrew them, disconnect the wires behind them (this part can be done by hand), and pull the element out. The new element slides right in! Just make sure the power to the stove is disconnected either by breaker or by unplugging it. I'm not sure if it matters, but I made sure to connect the wires to the same side of the element that they were removed from.

Was this instruction helpful to you?

Customer:: Shawn from Lubbock, TX
Parts Used:: WB31T10015, WB31T10014
Difficulty Level:: Really Easy
Total Repair Time:: Less than 15 mins

6" and 8" burner bowl replacement

Slide out burner elements. Remove old burner bowls. Insert new burner bowls and reinstall burner elements.

Was this instruction helpful to you?

Customer:: Diane from Rio Rancho, NM
Parts Used:: WB31T10015, WB31T10014
Difficulty Level:: Really Easy
Total Repair Time:: Less than 15 mins

Burner bowls had been used and abused for year gone by in this rental.

Replaced them all. Next I want to replace the burners.

Was this instruction helpful to you?

All Instructions for the JCBP35DM1BB