Models > JGB916BEK1BB > Instructions

JGB916BEK1BB General Electric Range - Instructions

Jump to:

All Instructions for the JGB916BEK1BB
61 - 74 of 74
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Customer:
Joel from Spokane, WA
Parts Used:
WB31K10217
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Bought a range but it did not include the griddle
Open a HUGH box to get a smaller box that was surrounded by air bubble packing. Opened smaller box, removed the range's center rack and replaced it with the griddle.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Patricia from Brandenburg, KY
Parts Used:
WB08T10026
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Nutdriver, Pliers
Oven light wire broken, damaged socket
Remove light bail, glass cover held by two nut screws. Pull socket, removed clips in back, replaced wire connectors, placed new socket in, then glass cover and bail. Wire connected in back, cover plate replaced.
Was this instruction helpful to you?
Thank you for voting!
Customer:
D. J. from Hoschton, GA
Parts Used:
WB31K10217
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
replacement of middle grate with griddle
Would have been easy, but I should have checked the measurements more carefully as it didn't fit. But the service from Part Select has been excellent!
Was this instruction helpful to you?
Thank you for voting!
All Instructions for the JGB916BEK1BB
61 - 74 of 74