JGBP28SET3SS General Electric Range - Parts

The igniter does not come with wire nuts. *** Please NOTE: The igniter connector may need to be cut off and wires spliced to the range wiring with the porcelain wire nuts.

This bottom oven and deflector assembly is a durable metal panel designed to fit beneath the oven floor, protecting the bake element from spills while promoting even heat distribution for consistent c...

This orifice spud changes the burner from natural gas to liquid propane. This orifice is sold individually. Size: .89MM

Switching your GE stove from natural gas to propane? This orifice spud helps make that change safely and smoothly—especially for the right rear burner. It’s built to fit select models and helps your s...

Please note: With this control the wiring could be different from the original. It will possibly need to be installed by an appliance repair person.

This economic nut is a manufacturer-approved replacement part for your oven range. The nut can become worn down or stripped over time and need replacing. Make sure to disconnect power to the unit and ...

CKT SCREW