Models > JBP30AA4 > Instructions

JBP30AA4 General Electric Range - Instructions

Jump to:

All Instructions for the JBP30AA4

Customer:: Leonard from Winter, WI
Parts Used:: WB21X36771
Difficulty Level:: Really Easy
Total Repair Time:: 15 - 30 mins
Tools:: Nutdriver, Pliers, Screw drivers

element heat wouldn vary

slid the range away from wall. disconnect power. removed back,compared switches and marked wires.installed new switch and wires.the adapter for the control knob was a problem it left the knob out futher than original i had to modify the plastic adapter and got it close enought! the most time spent was cleaning up the floor before putting the range back.

Was this instruction helpful to you?

Customer:: Ralph from Huntington Station, NY
Parts Used:: WB31T10015, WB31T10014, WB21X36771
Difficulty Level:: Really Easy
Total Repair Time:: 15 - 30 mins
Tools:: Screw drivers, Socket set

Part shipped had different hook-up configuation. Instructions were not very clear on rerouting of connections and use of adapter for old knob installation on new switch.

Bowls were easy... all that was need was remoal of heating elements and replacement of part. Switch required access to rear of stove; removal of back cover and knob; unscrew switch; transfer wires to new switch and install with two new screws; cut switch shaft and fit adpater (trouble here and instructions were no help)for old knob. SHIPPING WAS TERRIFIC RECEIVED ORDER NEXT DAY WITH ORDINARY DELIVERY.

Was this instruction helpful to you?

Customer:: Janice from West Warwick, RI
Parts Used:: WB15X10017
Difficulty Level:: Difficult
Total Repair Time:: 30 - 60 mins

Took old handle off and replaced with new one.

Quite hard to do,had to take out screw that went thru oven door,stabilizing piece fell off .We had to get the two screws lined up and thru the door then screw the handle in.but we did it!

Was this instruction helpful to you?

Customer:: Clifford from New smyrna beach, FL
Parts Used:: WB21X36771
Difficulty Level:: Easy
Total Repair Time:: 30 - 60 mins
Tools:: Nutdriver, Screw drivers

Burner constantly heated

Good directions

Was this instruction helpful to you?

Customer:: James from Eatonton, GA
Parts Used:: WB27X10311
Difficulty Level:: Easy
Total Repair Time:: 15 - 30 mins
Tools:: Nutdriver, Screw drivers

No power to the clock,oven and Broiler elements

Moved the range out and disconnected the power cord. Removed the back cover.Disconnected wires after labeling the them. Removed the unit from the range,Carefully removed the front decal and applied to the new unit. Installed the new unit into range and wired according to the instruction and put the covers back on. plugged back in and tested the range and everything functioned correctly.

Was this instruction helpful to you?

Customer:: Carol from Hamilton, OH
Parts Used:: WB21X36771
Difficulty Level:: Easy
Total Repair Time:: 30 - 60 mins
Tools:: Pliers, Screw drivers

Shaft for burner control knob broke off

I flipped breaker off for electic and confirmed that power to the stove was off. I removed the 2 screws holding the control unit in place. Carefully removed all knobs and buttons and pryed the cover for the control unit off. I then removed old part, removed the wired and clipped wires to the new unit. Put cover back on - has some difficulty getting the panel back in place to line up the screws. But after a couple of attempts, was able to line up unit and put screws in place to secure. Replaced all knobs. Turn breaker back on and cooked lunch. Very easy job. Most difficult part was getting panel back in position. I would watch alignment more carefully before I removed in next time. Easy home repair for Women...not sure about my man?

Was this instruction helpful to you?

Customer:: Joseph from Baden, PA
Parts Used:: WB21X36771
Difficulty Level:: Easy
Total Repair Time:: 30 - 60 mins
Tools:: Pliers, Screw drivers

Front Burner,no control of.

The original controls were different for the small burners and the large burners. The replacement part fits all. Before removing wires, pay attention to writing on new and old control and replace 1 at a time. The hardest part was being sure to cut the knob stem to the correct length. Control works well.

Was this instruction helpful to you?

Customer:: DeeAnn from Clinton, MO
Parts Used:: WB21X36771
Difficulty Level:: Really Easy
Total Repair Time:: Less than 15 mins
Tools:: Screw drivers

Knob had broken off

My husband was able to easily remove and replace the switch and know with-in 15 minutes.

Was this instruction helpful to you?

Customer:: Thomas from Montgomery,, AL
Parts Used:: WB30M1
Difficulty Level:: Really Easy
Total Repair Time:: Less than 15 mins

welded supports for the surface elements were broken

unplugged the broken elements and plugged in the new ones. Took about one minute. Tools used: hands and fingers.

Was this instruction helpful to you?

Customer:: Laurie from Eastport, NY
Parts Used:: WB44X10016
Difficulty Level:: Easy
Total Repair Time:: Less than 15 mins
Tools:: Wrench set

Lower bake element of stove

Turned power off, unscrewed the plate, disconnected the element, made sure I kept the connectors out of installation. Squished the new connectors onthe new part a bit. Connected it up. Pushed it back into the installation. and then screwed the plate back on to back of the stove. (Easy - I'm a 50 yr old female.)

Was this instruction helpful to you?

Customer:: Betty from Fayetteville, WV
Parts Used:: WB30M1
Difficulty Level:: Really Easy
Total Repair Time:: Less than 15 mins

the center of the element had broken

just pulled the old one out and replaced with new one. very easy

Was this instruction helpful to you?

Customer:: Jilan from South Milwaukee, WI
Parts Used:: WB30M2
Difficulty Level:: Really Easy
Total Repair Time:: Less than 15 mins

Scorched Element

It wasn't so much the repair that was needed as how impressed I was with the fast delivery. Without a fourth burner & a holiday weekend coming up I was in desperate need of my element. I ordered it around 1:00 pm on a friday & it was delivered the next day before noon! Very impressed with the ease of ordering & receiving. Thanks again.

Was this instruction helpful to you?

Customer:: Howard from Fort Bragg, CA
Parts Used:: WB30M2
Difficulty Level:: Really Easy
Total Repair Time:: Less than 15 mins

element burnt out

changed element

Was this instruction helpful to you?

Customer:: Jerry from Copperas Cove, TX
Parts Used:: WB30M2
Difficulty Level:: Really Easy
Total Repair Time:: Less than 15 mins

No Problems

I removes the old element and drip bowl, then replaced the drip bowl, then replaced with the new element. Approximatly 3 minutes. . .

Was this instruction helpful to you?

Customer:: Michael from Scituate, MA
Parts Used:: WB30M2
Difficulty Level:: Really Easy
Total Repair Time:: Less than 15 mins

Burned out surface element

This is an easy repair and for anyone thinking that they might have trouble effecting it, you all have my assurance that all the heat related elements are easily replaced. These elements are basically plug in and there is a shielded area (usually placed in the northeast quadrant of the burner unit. With everything turned off, pull the burnt out surface element up and toward the southwest. It should unplug from the female receptacle. Installing a new element involves performing this in reverse by coming into the surface with the prongs facing downward towards the receptacle and then pushing towards the northeast and downward at the same time The element should click into place. The entire time necessary to effect this repair should be less than ten minutes.

Was this instruction helpful to you?

All Instructions for the JBP30AA4