JGB280DER1CC General Electric Range - Parts

This is the replacement burner cap for your gas range. It is made of gray plastic and is approximately 3 inches in diameter. It has 3 small tabs on the bottom, with one tab that is larger than the oth...

The igniter does not come with wire nuts. *** Please NOTE: The igniter connector may need to be cut off and wires spliced to the range wiring with the porcelain wire nuts.

This bottom oven and deflector assembly is a durable metal panel designed to fit beneath the oven floor, protecting the bake element from spills while promoting even heat distribution for consistent c...

This is the replacement front surface burner tube and orifice for your gas range. You will find the orifice under the cooktop, beneath the burner. This part supplies fuel from the gas line to the stov...

This is a set of 4 black burner caps.

This orifice spud changes the burner from natural gas to liquid propane. This orifice is sold individually. Size: .89MM

This oven temperature sensor helps maintain accurate heat by measuring the internal temperature and sending signals to the control board. If your oven is not heating properly or cooking unevenly, this...

Switching your GE stove from natural gas to propane? This orifice spud helps make that change safely and smoothly—especially for the right rear burner. It’s built to fit select models and helps your s...

Please note: With this control the wiring could be different from the original. It will possibly need to be installed by an appliance repair person.