Models > JB770TP1WW > Instructions

JB770TP1WW General Electric Range - Instructions

Jump to:

All Instructions for the JB770TP1WW

Customer:: walter from townshend, VT
Parts Used:: WB21X22134
Difficulty Level:: Really Easy
Total Repair Time:: Less than 15 mins
Tools:: Nutdriver

oven was not getting up to temp

Once I opened up the back of the range, the sensor wires where there and burnt just like your info said. One nut to take off in the oven and the sensor came right out and the new one went right in. The oven works great, cooked the turkey today. The worst part of the repare was the cleaning behind and under the range, it hasn't moved since it was put in 6 years ago. Very pleased with PS.

0 of 1 people found this instruction helpful.

Was this instruction helpful to you?

Customer:: jud from gatesville, TX
Parts Used:: WB21X22134
Difficulty Level:: Really Easy
Total Repair Time:: Less than 15 mins
Tools:: Nutdriver

F2 error code

Really easy fix. Unplug oven. With a 5/16 nut driver take the 5 screws out of the center long tin cover and remove. Unplug little white temperature sensor plug located between broil heating element. Open oven door and remove one screw holding temp. sensor using same nut driver and simply pull out old sensor. Install new sensor. It's that easy. No more f2 been working like a champ!!!

0 of 2 people found this instruction helpful.

Was this instruction helpful to you?

Customer:: David from Lisle, IL
Parts Used:: WB21X22134
Difficulty Level:: Really Easy
Total Repair Time:: Less than 15 mins
Tools:: Nutdriver

oven not warming, f2 indicating overheat

Removed 4 screws from back panel, disconnected small electricsl connector from sensor, removed one mounting screw from sensor inside oven,pulled wires through and removed old sensor. Fed wires for new sensor through and connected electrical connector, installed panel, installed mounting screw on sensor and checked oven, worked like a champ. Took 5 minutes.

Was this instruction helpful to you?

Customer:: Barbara from Jacksonville, FL
Parts Used:: WB56T10187
Difficulty Level:: Really Easy
Total Repair Time:: Less than 15 mins
Tools:: Screw drivers

I broke the glass on the door & needed to replace it.

It was easy, it just fit in. I was afraid the part might not be right or that I would need extra parts but everything was great. Part arrived in 3 days. thanks

Was this instruction helpful to you?

Customer:: Robert from Shakopee, MN
Parts Used:: WB02X33180
Difficulty Level:: Really Easy
Total Repair Time:: Less than 15 mins
Tools:: Nutdriver

Stove drawer rear guides broken

Installed new guides with a nut driver without any problems.

Was this instruction helpful to you?

Customer:: Lowell from Boulder, CO
Parts Used:: WB15T10176
Difficulty Level:: Really Easy
Total Repair Time:: Less than 15 mins
Tools:: Screw drivers, Socket set

broken handle on oven door

Used star screw driver to take door apart used socket set to unscrew handle screws. Installed new handle. Handle fit perfectly.

Was this instruction helpful to you?

Customer:: Dave from Woodbine, MD
Parts Used:: WB08T10023
Difficulty Level:: Easy
Total Repair Time:: Less than 15 mins

3 of 4 Oven Lamps burnt out

Remove the glass cover to the halogen lamp fixture (counter clockwise turn, about a 1/4 turn). Recommend use of rubber coated gloves as the glass covers do not offer much by way of a good grip. Gently remove the halogen lamp (bulb) and insert new bulb into socket. Since the oven door is open, the lamp will light up indicating successful installation. Replace the glass cover (clockwise turn) until secure. Pitch the burnt out halogen lamp in the trash.

Was this instruction helpful to you?

Customer:: Robert from Estero, FL
Parts Used:: WB24T10058
Difficulty Level:: Easy
Total Repair Time:: Less than 15 mins
Tools:: Nutdriver, Pliers, Screw drivers

Dual burner on range stopped working.

Changed out the burner with a new replacement and it still didn't work. The socket on the old burner had a burn mark on it. The infinite switch operated sloppy not crisp like the other burners.Ordered a replacement online. Moved the range away from wall and cabinet and shut off electric at panel box. Removed upper back panel. removed switch knob and 2 screws holding switch. Compared electrical connections of both switches and saw that they were different. Read instructions which were included with new switch and found diagram for connecting old lead to new lead correctly. After all leads were connected, remounted new switch powered up and tested OK.

Was this instruction helpful to you?

Customer:: Steven from Lansdale, PA
Parts Used:: WB02X33180
Difficulty Level:: Really Easy
Total Repair Time:: Less than 15 mins
Tools:: Screw drivers

Hard to move drawer in and out because the rear drawer supports broke off.

Repair was very easy - less than a few minutes - just had to screw in 2 screws to the new drawer supports.

Was this instruction helpful to you?

Customer:: Morris from Ardmore, TN
Parts Used:: WB24T10058
Difficulty Level:: Really Easy
Total Repair Time:: Less than 15 mins
Tools:: Screw drivers, Wrench (Adjustable)

Left front burner would only heat on high setting.

Identified part and part # using schematic found on GE website, contacted PartSelect and confirmed part number, ordered and paid for part. Two days later I recieved part. Unplugged stove, removed two screws on bottom side of front panel and two on top back of same panel, pulled panel forward, pulled the control knob off, removed two small screws that hold the control switch in place, situated new control switch next to bad switch and removed one wire at the time from the bad switch and connected to the same terminal on the new switch. Put everything back together and Bingo, works like a new one. Thanks PartSelect for the friendly, personal phone service, the fast shipment and competitive pricing on my part.

Was this instruction helpful to you?

Customer:: Barbara from Sun City West, AZ
Parts Used:: WB03T10282
Difficulty Level:: Really Easy
Total Repair Time:: Less than 15 mins

prior knobs were discolored and ugly

just purchased new knobs. The price was great, just took a little longer to receive then anticipated though.

Was this instruction helpful to you?

Customer:: James from Stuart, VA
Parts Used:: WB02X33180
Difficulty Level:: Really Easy
Total Repair Time:: Less than 15 mins
Tools:: Screw drivers

Plastic slide for storage drawer broken.

Took part out of package, looked at instructions and followed them. Required a screwdriver to screw part on to the drawer.

Was this instruction helpful to you?

Customer:: Kenneth from Salem, OR
Parts Used:: WB21X22134
Difficulty Level:: Really Easy
Total Repair Time:: Less than 15 mins
Tools:: Nutdriver

Flashing F2 and erratic temperature readings.

Unplugged from wall outlet, then opened oven front door. Reached in and removed two screws. Pulled oven sensor threw and detached electrical connector from old sensor. Plugged in new oven sensor and reversed removal procedure. No more Flashing F2 and oven temperature came to ready. Very easy.

Was this instruction helpful to you?

Customer:: Robert from Woodinville, WA
Parts Used:: WB02X33180
Difficulty Level:: Really Easy
Total Repair Time:: Less than 15 mins
Tools:: Screw drivers

Our bottom drawer support broke and the bottom drawer was canted

Simply removed drawer and lined up the newsupports. Made sure the guide pin was lined up and installed with single screw

Was this instruction helpful to you?

Customer:: TERRY from RICHMOND, VA
Parts Used:: WB02X33180
Difficulty Level:: Really Easy
Total Repair Time:: 15 - 30 mins
Tools:: Socket set

rear drawer supports broke

Directtions were by diagram only, no written instructions. Drawing was small and difficult to follow but the repair itself was easy.

Was this instruction helpful to you?

All Instructions for the JB770TP1WW