EGR2000EM3BB General Electric Range - Parts

The igniter does not come with wire nuts. *** Please NOTE: The igniter connector may need to be cut off and wires spliced to the range wiring with the porcelain wire nuts.

This bottom oven and deflector assembly is a durable metal panel designed to fit beneath the oven floor, protecting the bake element from spills while promoting even heat distribution for consistent c...

This is the replacement front surface burner tube and orifice for your gas range. You will find the orifice under the cooktop, beneath the burner. This part supplies fuel from the gas line to the stov...

This orifice spud changes the burner from natural gas to liquid propane. This orifice is sold individually. Size: .89MM

Switching your GE stove from natural gas to propane? This orifice spud helps make that change safely and smoothly—especially for the right rear burner. It’s built to fit select models and helps your s...

Please note: With this control the wiring could be different from the original. It will possibly need to be installed by an appliance repair person.