Models > JGBP30CEH2CC > Parts

JGBP30CEH2CC General Electric Range - Parts

Jump to:

13 - 24 of 193
Keep searches simple, eg. "belt" or "pump".
This is the replacement burner cap for your gas range. It is made of gray plastic and is approximately 3 inches in diameter. It has 3 small tabs on the bottom, with one tab that is larger than the oth...
No Longer Available
In Stock
Order now and your part arrives by Jun 5
In Stock
Order now and your part arrives by Jun 5
The igniter does not come with wire nuts. *** Please NOTE: The igniter connector may need to be cut off and wires spliced to the range wiring with the porcelain wire nuts.
In Stock
Order now and your part arrives by Jun 5
This bottom oven and deflector assembly is a durable metal panel designed to fit beneath the oven floor, protecting the bake element from spills while promoting even heat distribution for consistent c...
In Stock
Order now and your part arrives by Jun 5
In Stock
Order now and your part arrives by Jun 5
This right-side drawer glider allows smooth and stable drawer movement. Designed for durability and precise alignment, it supports effortless opening and closing.
In Stock
Order now and your part arrives by Jun 5
This is a set of 4 black burner caps.
On Order
This orifice spud changes the burner from natural gas to liquid propane. This orifice is sold individually. Size: .89MM
In Stock
Order now and your part arrives by Jun 5
This orifice spud changes the burner from liquid propane (LP) to natural gas. This orifice is sold individually. Size: 1.50MM
Special Order
No Longer Available
Switching your GE stove from natural gas to propane? This orifice spud helps make that change safely and smoothly—especially for the right rear burner. It’s built to fit select models and helps your s...
In Stock
Order now and your part arrives by Jun 5
13 - 24 of 193