Models > JGBS04BEA1CT > Instructions

JGBS04BEA1CT General Electric Range - Instructions

Jump to:

All Instructions for the JGBS04BEA1CT

Customer:: Tamyra from Friendship, WI
Parts Used:: WB16K10026
Difficulty Level:: Really Easy
Total Repair Time:: Less than 15 mins

Stove burners no longer working

Ordered 4 new burners, snapped the old ones out, put the new ones in and my stove works great. Also, I got my parts in 1 day. Very satisfied with my experience with PartSelect.

Was this instruction helpful to you?

Customer:: Charmaine M from York, PA
Parts Used:: WB16K10026
Difficulty Level:: Really Easy
Total Repair Time:: Less than 15 mins

right side burns would not light, if they did it wrapped around outside of burner unit

Pulled old burners out, cleaned area, sat new units in place, made sure they were stable(no rocking), put the top down on the stove and all burners light like new!!

Was this instruction helpful to you?

Customer:: Norton from Malta, NY
Parts Used:: WB16K10026
Difficulty Level:: Really Easy
Total Repair Time:: Less than 15 mins

One burner wouldn't light

Removed old and set inserted new

Was this instruction helpful to you?

Customer:: Kate from San Francisco, CA
Parts Used:: WB03K10037
Difficulty Level:: Really Easy
Total Repair Time:: Less than 15 mins

housecleaners had scrubbed off the majority of thermostat numbers

took off the old one; put on the new one! easy-peasy.

Was this instruction helpful to you?

Customer:: Gary from Alameda, CA
Parts Used:: WB20K8
Difficulty Level:: A Bit Difficult
Total Repair Time:: 30 - 60 mins
Tools:: Nutdriver, Pliers, Screw drivers

With the oven dial at OFF, the oven would turn on by itself every 5 to 10 minutes and it would heat up to about 100F and shut off.

Unplugged the range. Took out all the necessary screws and lifted up the cooktop cover. Unscrewed each gas tubes connecting to each gas burner's dial to allow more working space. Pulled out the old thermostat, installed the new one. Put back the gas tubes and all other necessary screws. Plugged the range and tested out the new thermostat.

Was this instruction helpful to you?

Customer:: Pamela S from Chesterland, OH
Parts Used:: WB20K8
Difficulty Level:: A Bit Difficult
Total Repair Time:: 1- 2 hours
Tools:: Nutdriver, Pliers, Screw drivers

Oven Heating Too Hot, More Than 100 Degree Beyond Setting

Replaced the oven thermostat and calibrated the new thermostat by adjusting the temperature setting knob. Instruction I found on-line were very helpful and the repair was moderately difficult. Trickiest part was threading the new thermostat into the oven. Total repair time about 1 hour.

Was this instruction helpful to you?

Customer:: Patricia A from Newport, NH
Parts Used:: WB16K10026
Difficulty Level:: Really Easy
Total Repair Time:: Less than 15 mins

gas flame flared and blackened pots; gas jets clogged

raised the range top so the supports locked in place. carefully lifted off the old burner assemblies. used a paper towel to remove any black soot from gas jets. opened the plastic package of the new burner assemblies, pulled out the new parts and carefully put them in place. turned on the flame to test... took less than 5 minutes to fix a problem that's been annoying for 3 years!!

Was this instruction helpful to you?

Customer:: David from Cincinnati, OH
Parts Used:: WB16K10026
Difficulty Level:: Really Easy
Total Repair Time:: Less than 15 mins

3 of 4 Burners would not light

Open the stove top pulled old burners out dropped new set in place. Theyclick right in NO TOOLS REQUIRED!!!!

Was this instruction helpful to you?

Customer:: Birgit from Opelousas, LA
Parts Used:: WB16K10026
Difficulty Level:: Really Easy
Total Repair Time:: Less than 15 mins

Burners were dirty and wore out

Unplugged the old ones. Cleaned the stove top. Plugged in the new ones.

Was this instruction helpful to you?

Customer:: Rudy from Waterloo, IA
Parts Used:: WB20K8
Difficulty Level:: Easy
Total Repair Time:: 30 - 60 mins
Tools:: Screw drivers

Thermostat knob broke off

Cut off the power. unscrewed the cover. fed the new thermostat inside the over and rescrewed. Feeding the line was the most time consuming finding the hole to insert it in the back of the oven.

Was this instruction helpful to you?

Customer:: Joseph C from Williamsport, IN
Parts Used:: WB20K8
Difficulty Level:: Really Easy
Total Repair Time:: 30 - 60 mins
Tools:: Nutdriver, Pliers, Screw drivers

Temperatures were much usually hotter than indicated

First of all I had to find the right part from Partselect, which was very easy, delivery was fantastically fast even tho I didn`t order special delivery. After reading installation suggestions on the website, it was simple, open the top, disconnect the burners, removed the thermo from the inside. The only hard part was threading the sensor through the correct hole. I had to remove a couple of cover plates to see where the hole was. Put it back together, lit the oven and the temps were correct, as shown by an oven thermometer.

Was this instruction helpful to you?

Customer:: Heidi from Carrollton, TX
Parts Used:: WB15X10047
Difficulty Level:: Really Easy
Total Repair Time:: Less than 15 mins

Oven Door Handle Broke

The repair was very easy. It did require a very small torx driver (I can't remember the size off hand.) and a 1/4" nut driver.

Was this instruction helpful to you?

Customer:: JOHANNA from GERMANTOWN, MD
Parts Used:: WB16K10026
Difficulty Level:: Really Easy
Total Repair Time:: Less than 15 mins

both burners were bad

Just opened the box, removed the 2 old burners and replaced with the 2 shiny new ones. Yeah success! I placed my order for this product and before I knew it, it was at my front door. Thank you!

Was this instruction helpful to you?

All Instructions for the JGBS04BEA1CT