JGBP28GEJ6 General Electric Range - Instructions
Jump to:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
All markings on all the knobs were gone.
Pulled off old unreadable knobs. Cleaned area and pushed on new readable knobs.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Judy from Springfield, VA
- Parts Used:
- WB3X712
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
The tube on the old knob snapped.
The new knob was the exact part. It slipped right on.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Robert from Boston, MA
- Parts Used:
- WB3X712
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Knob was broken
Changed the knob. Just like that, it worked like a charm.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Edith from Haverhill, MA
- Parts Used:
- WB3X711
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
no knob
Mom lives 2900 miles away, she calls, says moved in year ago and never used oven. Why? No knob; no store had part and she could not figure out temp;Mom not think about thermometer; Dad used to do that for her. Go to your site and start typing in numbers fron Mom's range..found closest match; mind you stove 20+ years old...Mom calls overjoyed friend put thermometer in oven then and it worked; phone call so cute her so excited and all. Thank you for keeping your parts from changing tremendously as now Mom can make all the baked meals she has always enjoyed. Greatful Daughter
Was this instruction helpful to you?
Thank you for voting!
crusty dirty drip pans, knob stem cracked,
replaced with new drip pans and knob. stove looks brand new. easy fix and great improvement, thank you. also fast delivery. very pleased would recommend.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Eric from Diamond Bar, CA
- Parts Used:
- WB3X712
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
The original top burner control knob broke off
The repair in my situation is very easy and simple. Just push new control knob into the valve and it's done. I am pleased with my order and I received it sooner than I expected.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Danial from HILLSBORO, TX
- Parts Used:
- F26T8-CW-4
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Screw drivers
Fluorescent lamp bulb
Unscrew the metal rim and remove the glass window. Remove the old bulb by twesting the bulb towards you. Place the new bulb's pins into the slots and twest away from you. Place the metal rims back in place and screw them down.
Was this instruction helpful to you?
Thank you for voting!
old broken parts
piece of cake - this asks for too much data - your parts supply rates high - I will use again for other stuff
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Teresa from Oak Grove, MO
- Parts Used:
- WB3X710
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
back of knob was cracked and would change the selector to bake etc....
all I had to do was push the new knob onto the metal post (it will only go on one way as it is "D" shaped) and now it works fine.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Keith from Mercer Island, WA
- Parts Used:
- WB24X377
- Difficulty Level:
- Easy
- Total Repair Time:
- 30 - 60 mins
- Tools:
- Screw drivers, Wrench set
The switch for the stovetop fluorescent light failed.
It took only ten minutes to locate the correct replacement switch for my 20+ year old GE range on the PartSelect website, and only two days for it to arrive at my home. After removing the rear panel behind the control module, it became apparent that there were clips on each side that held the glass front panel in place. I removed the screws for each clip and the thumbscrews on the two front-mounted switches, and the glass panel came free easily. Wiring for the new switch was simple plug-and-play (4 leads), and reassembly was a snap. I was VERY careful with the glass front panel, which is NLA as a replacement part.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Joseph from Clay, NY
- Parts Used:
- WB24X379
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Screw drivers
Right front burrner wouldn't start
Pulled the knob's off the front of the stove. Removed 7 phillps screws holding on the front plate, pulled off the front plate, removed the ignitenr, and then reassembed the stove. It worked great.
Was this instruction helpful to you?
Thank you for voting!
could not select correct temperature or hold temperature
I removed all the knobs and then pulled the stove out. I then unscrewed everything starting at the top of the stove and exposed the thermostat control. I followed the thermostat line and continued to remove screws and panels until it was completely exposed. I followed the line into the stove and removed the end of the thermostat. I then unscrewed the control and removed the item completely. Then I screwed the new thermostat control in place and proceeded to thread the line until I had it in its proper location in the oven. I then replaced all the parts, cleaning everything before I returned them into place.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- christine from new york, NY
- Parts Used:
- WB2X10016
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
Oven would not light
Removed old ignighter and replaced it with the new one. No brainier. Took longer to find the correct part, mine had three wires, most are just two.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Jeremy from Williamsburg, VA
- Parts Used:
- WB3X712
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Replacing Broken Knobs
Just put the new knobs on and they worked good as new.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Randy from Winter, WI
- Parts Used:
- WB28X67
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Only one and a half burners worked.
I just had to lift the top of the stove. Then pull the old burners out and put the new ones. It took longer to ignite the flame than replace the burner. Works great !!!
Was this instruction helpful to you?
Thank you for voting!