JGHP57GEJE General Electric Range - Instructions
Jump to:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- Maurice from Overland Park, KS
- Parts Used:
- WB2X10016
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Nutdriver, Pliers, Screw drivers
oven not up to temperature; shuts off before temp set
Took amp reading, which was 2.5 amps, that identified that the igniter needed to be replaced, for the safety valve requires 3.2 amps or better. Replaced, and everything is okay.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- GENE from HEBRON, OH
- Parts Used:
- WB2X10016
- Difficulty Level:
- Difficult
- Total Repair Time:
- 30 - 60 mins
- Tools:
- Screw drivers, Socket set
Igniter
No problem getting to igniter in oven to remove from holder. Difficult to disconnect igniter at rear after removing drawer. Just hard to get to. Broke one of the plug-in receivers so had to crimp on a new one. This was a hinged pair that received the igniter lead and another lead that went to another part.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Fred from Avon, OH
- Parts Used:
- WB32X90
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Replacing old drip pans
Our very old GE gas stove looked good except for the drip pans. I ordered all four and they arrived the next day. The price for the pans was very reasonable, and of course, they were very easy to replace. My wife looked at the stove and said the stove looked new. I love those inexpensive jobs that result in a good looking finished project.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Steve from Flanders, NJ
- Parts Used:
- WB2X10016
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Screw drivers
Oven Igniter DEAD
First wrote a wiring diagram then disconnected old igniter by removing two screws and unplugging.
Then just reversed the whole operation.
However, it never worked because the "oven/broiler" switch broke.
Its time for a new stove.
But I would recommend PartsSelect to anybody.
Your selection is great, you shipped as promised, and the best part was the price.
Then just reversed the whole operation.
However, it never worked because the "oven/broiler" switch broke.
Its time for a new stove.
But I would recommend PartsSelect to anybody.
Your selection is great, you shipped as promised, and the best part was the price.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- christine from new york, NY
- Parts Used:
- WB2X10016
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
Oven would not light
Removed old ignighter and replaced it with the new one. No brainier. Took longer to find the correct part, mine had three wires, most are just two.
Was this instruction helpful to you?
Thank you for voting!