Models > JBS86EP4ES > Instructions

JBS86EP4ES General Electric Range - Instructions

Jump to:

All Instructions for the JBS86EP4ES
106 - 120 of 132
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Customer:
daniel from gap, PA
Parts Used:
WB21X22134
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Screw drivers
f-2 or f-3
remove two bolts in on sensor and slip thru back un plug and reverse to put in
Was this instruction helpful to you?
Thank you for voting!
Customer:
Judith from Keezletown, VA
Parts Used:
WB24T10029
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Pliers, Screw drivers
Replacment of burner control switches
I watched your video on the subject and followed it exactly. It explained everything I needed to know. The hardest part was CLEANING under the stove once I pulled it out from the wall!
Was this instruction helpful to you?
Thank you for voting!
Customer:
Henry from Sonoita, AZ
Parts Used:
WB27T10668
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers, Socket set
Pilot light out
Removed the power plug from the wall, screwdriver and small socket allowed me to remove the front control panel. Once I located the pilot light I pulled off the holding clips and placed a new light into the holding clips...problem solved.
Was this instruction helpful to you?
Thank you for voting!
All Instructions for the JBS86EP4ES
106 - 120 of 132