Models > JB750SJ9SS > Instructions

JB750SJ9SS General Electric Range - Instructions

Jump to:

All Instructions for the JB750SJ9SS
121 - 135 of 145
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Customer:
TERRY from RICHMOND, VA
Parts Used:
WB02X33180
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Socket set
rear drawer supports broke
Directtions were by diagram only, no written instructions. Drawing was small and difficult to follow but the repair itself was easy.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Henry from Sonoita, AZ
Parts Used:
WB27T10668
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers, Socket set
Pilot light out
Removed the power plug from the wall, screwdriver and small socket allowed me to remove the front control panel. Once I located the pilot light I pulled off the holding clips and placed a new light into the holding clips...problem solved.
Was this instruction helpful to you?
Thank you for voting!
Customer:
lynn from sunnyside, NY
Parts Used:
WB21X22134
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Pliers
F2 reading
Followed the instructions that were sent to me by E-Mail.
Was this instruction helpful to you?
Thank you for voting!
All Instructions for the JB750SJ9SS
121 - 135 of 145