JGBP24GEH3 General Electric Range - Instructions
Jump to:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- Gary from Riverside, CA
- Parts Used:
- WB24X379
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Pliers, Screw drivers
Burner would not light
Ordered new igniter switch, but Fedex lost it! Partselect sent new one overnight. Really a cinch to install. Be sure to unplug oven or turn off breaker if you are not comfortable with working with live electrical wires!
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Doris from Redwood City, CA
- Parts Used:
- WB3X459
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
timer knobs missing
Just pushed the new timer knobs onto the stem. They fit and now I can set the oven timer without having to use a pair of pliers to grip the stem and turn it.
Two of the knobs fit perfectly.
The stem for the the clock was broken off and there was not enough of the stem left for the new knob to fit.
Two of the knobs fit perfectly.
The stem for the the clock was broken off and there was not enough of the stem left for the new knob to fit.
Was this instruction helpful to you?
Thank you for voting!
Oven door was hard to open
Removed 2 screws and unhooked the spring. then hooked the spring back up installed 2 screws and I was done. Very easy
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Joseph from Clay, NY
- Parts Used:
- WB24X379
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Screw drivers
Right front burrner wouldn't start
Pulled the knob's off the front of the stove. Removed 7 phillps screws holding on the front plate, pulled off the front plate, removed the ignitenr, and then reassembed the stove. It worked great.
Was this instruction helpful to you?
Thank you for voting!