RGB740BEHW General Electric Range - Parts

This part sends enough current to the igniter to create a spark to the bottom of the burner cap.

The igniter does not come with wire nuts. *** Please NOTE: The igniter connector may need to be cut off and wires spliced to the range wiring with the porcelain wire nuts.

This bottom oven and deflector assembly is a durable metal panel designed to fit beneath the oven floor, protecting the bake element from spills while promoting even heat distribution for consistent c...

Replace your broken or missing oven door handle with this black plastic version, measuring 30" long and 1.5" wide. It attaches to the oven door for easy opening and is sold individually. Direct from t...

This right-side drawer glider allows smooth and stable drawer movement. Designed for durability and precise alignment, it supports effortless opening and closing.

This orifice spud changes the burner from natural gas to liquid propane. This orifice is sold individually. Size: .89MM

This orifice spud changes the burner from liquid propane (LP) to natural gas. This orifice is sold individually. Size: 1.50MM

Switching your GE stove from natural gas to propane? This orifice spud helps make that change safely and smoothly—especially for the right rear burner. It’s built to fit select models and helps your s...

Sold individually. This knob can accept a D-shaped shaft.

This screw is less than 1/2 inch in length. It is sold individually.