JKC26204 General Electric Range - Instructions
Jump to:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- Duncan from Laurel, MD
- Parts Used:
- WB44X5082
- Difficulty Level:
- Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Socket set
The oven would not work due to a hole in the lower bake element
Firstly a big thanks to Parts Select.com I order the part on a Monday and it was delivered on the Wednesday of the same week!
Firstly I pulled the stove out of the space between the counter tops. Next I unplugged the stove. I opened the oven door unscrewed the two screws holding the element onto the back of the oven. Next I unscrewed the two screws that fastened the wires onto the two ends of the element. The element was then able to be removed from the oven. I then fitted the new element by repeating the same procedures to take the element out. The whole process took me less than 15 minutes.
Firstly I pulled the stove out of the space between the counter tops. Next I unplugged the stove. I opened the oven door unscrewed the two screws holding the element onto the back of the oven. Next I unscrewed the two screws that fastened the wires onto the two ends of the element. The element was then able to be removed from the oven. I then fitted the new element by repeating the same procedures to take the element out. The whole process took me less than 15 minutes.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Fernando from Auburn, GA
- Parts Used:
- WB44X5082
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Nutdriver
Burned out oven element
Remove two screws that secure the plate to the oven wall. Pull element out about 6 inches, then remove two screws that attach the element to power lines. Reverse for installation. Very easy.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Marcus from Spring Lake, MI
- Parts Used:
- WB44X5082
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Nutdriver
Bottom Bake Element burned out
Replaced old bake element with new one. 4 small screws/nuts. From order to fix was 3 days. My wife was impressed.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Nicholas from Davidsonville, MD
- Parts Used:
- WB44X5082
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers, Socket set
Baking element in oven broken
Went on line to find the part number and ordered the part. It came in the mail two days later and I installed in about five minutes.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Sean from Longmont, CO
- Parts Used:
- WB44X5082
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Wrench (Adjustable)
Bake element not working
Very easy to replace. Oven works like new again. If you have even the most basic visual and mechanical ability, you will be fine to do this on your own. Total repair time for me was less than 5 minutes. The part was an exact fit!
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Laurie from Jonesborough, TN
- Parts Used:
- WB44X5082
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Pliers, Wrench (Adjustable)
bake element burned out
Took the old one out, measured it, ordered the appropriate size, intalled the new one.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Charles from Bethlehem, PA
- Parts Used:
- WB44X5082
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers, Wrench set
bake element in oven burned out
Removed old element from back of oven with closed wrench and removed wires from element with screwdriver. Took me longer to find screwdriver than to install part. Finding part and ordering it was a snap. Got part in day and half. Great service and price. This is the place for parts and instructions. Will definitly use it again. My wife thinks I'm a genious. Thanks PARTSELECT.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Halimah from Charlotte, NC
- Parts Used:
- WB44X5082
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Pliers, Screw drivers
Bake element burned out.
My son used a screw driver and needle nose pliers to remove the old element. He then slide the new element on, put the screws in and he was done.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Peter from Las Vegas, NV
- Parts Used:
- WB44X5082
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Nutdriver, Screw drivers
burnt out bake element
This was a simple repair. Be sure to turn breaker to stove off before you start. Then remove two small screws holding element to back of stove, pull out element and disconnect two wires and remove. Reverse the steps for installation.Very simple
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Stephan from Gladstone, MO
- Parts Used:
- WB44X5082
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Nutdriver, Screw drivers
Replace the large heating element.
It would have gone with ease but the screws holding the element to the conductors were not original. Once those were removed, we were able to use the screws included and were done in 5 minutes.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- suzanne from crofton, MD
- Parts Used:
- WB44X5082
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Nutdriver, Pliers
Heating element in oven gave up on Monday before Thanksgiving.
Totally pleased! I ordered the part Monday evening, and it was delivered Wednesday morning. Awesome! Was able to change the part in about 15 minutes. Thanksgiving was a success! Part Select saved my Thanksgiving! Highly recommend :) Thank you!
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- ANDREW from CHICAGO, IL
- Parts Used:
- WB44X5082
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Wrench (Adjustable)
Broken Bake Element
Removed bolts from fixing plate, pulled out existing element, unscrewed wire connectors and installed new element in reverse order of removal. This is an old stove from the 60's or 70's so I was glad to get a replacement part and fit it myself so easily.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- William from Hamden, CT
- Parts Used:
- WB44X5082
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Nutdriver, Screw drivers
Original bake element burned out
Followed directions left by a previous user on PartSelect: 1. open oven door and lifted it off hinges; 2. Unscrewed mounting element mounting plate from rear of oven (may need nutdriver, allen wrench or screwdriver) 3. Unscrewed electrical leads from element; replaced with new element and reversed the steps.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Teresa from Grand Foks, ND
- Parts Used:
- WB44X5082
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Nutdriver, Screw drivers
oven element cracked apart, oven would not heat
1-Shut off the breaker
2-Pulled off the oven door for easier access
3-Unscrewed the old element plate
4-Unscrewed the red and black wires from the old element
5-Screwed on the new element to the wires
6-Replaced the screws on the new element plate
7-Turned the power back on
2-Pulled off the oven door for easier access
3-Unscrewed the old element plate
4-Unscrewed the red and black wires from the old element
5-Screwed on the new element to the wires
6-Replaced the screws on the new element plate
7-Turned the power back on
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Philip from Boca Raton, FL
- Parts Used:
- WB44X5082
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Nutdriver, Screw drivers
Baking element burned out.
I am a CPA and not real handy at all. But I was able to remove the old element and install the new element in less then 15 minutes. It burned out on Saturday, I ordered new one FED-ex to speed up- received new one, on Tuesday. Very quick, and this was last week, the week prior to Thanksgiving- so my wife really needed our oven. Perfect fit. And I am not related to this company in any way, nor was I paid anything to say this, just happy this worked- or we'd be spending a lot more money.
Was this instruction helpful to you?
Thank you for voting!