LFEF3048QFA Frigidaire Range - Instructions
Jump to:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- Deborah from Deatsville, AL
- Parts Used:
- 316075103
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Nutdriver
baking element burnt out
It was so easy. We pulled the stove away from the wall and unplugged it. My husband used a nutdriver to unscrew the two screws holding the element in place. He unplugged the wires from it when he pulled it out. He plugged the wires to the new element, screwed it back in place and voila! I was ready to bake. So very easy.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- MICHAEL from POINT PLEASANT, WV
- Parts Used:
- 316075103
- Difficulty Level:
- Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Nutdriver
broken bake element
nothing to it
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- ronnie from cana, VA
- Parts Used:
- 316436001
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Screw drivers
the stove eye would go to high and stay
watched the veido first then un pluged the stove then i took out 6 screws and 2 from the switch and reversed every thing
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Donna from Taylorville, IL
- Parts Used:
- 316075103
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
Lower heat element quit working
Undid two screws; removed old element; inserted new element and placed the bracket and two screws to hold in place.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Ilene from Albuquerque, NM
- Parts Used:
- 316075103
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Needed to replace the bottom heating element in my oven
I watched the video--that was very, very helpful. My son helped me, but I think I might have been able to handle it without him after watching the video. Also, your price was far less than half of what another website quoted for the same heating element.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Steve from lake Hiawatha, NJ
- Parts Used:
- 316075103
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Nutdriver
Oven not heating
Removed oven from wall, disconnect power source, loosen nuts from element, pull element out, disconnect wires, hook up wires to new element, put back nuts.Plug in and it worked great.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Elizabeth from Houston, TX
- Parts Used:
- 316075103
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Socket set
Bake element burnt out
Disconnected power; unscrewed element from oven wall; pulled element off of contacts. Pushed new element onto contacts; screwed to oven wall
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Megan from Savannah, GA
- Parts Used:
- 316075103
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Socket set
Bake element caught fire and stopped working
After in I found my oven glowing from the small fire inside, I thought I was in for an expensive repair or complete replacement. Part select helped me find the exact part I needed and the video showed me just how easy it would be. $40 and 15 min later my oven was fixed and I was baking again! The repair consisted of removing two screws and simply removing and plugging in the new bake element. Thanks for the help!!
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Michael from Wimauma, FL
- Parts Used:
- 316400601
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
Purchased home where previous owner melted Aluminum Foil to bottom panel of oven.
Removed 2 screws from rear of panel and dropped new panel in. Re-installed screws. Oven like new again. Aluminum foil was burning and emitting foul odor when oven was on.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Cathy from Farmersburg, IN
- Parts Used:
- 316075103
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 30 - 60 mins
- Tools:
- Screw drivers, Socket set, Wrench (Adjustable)
replace oven element
good
Was this instruction helpful to you?
Thank you for voting!