Models > FGF368GSA > Instructions

FGF368GSA Frigidaire Range - Instructions

Jump to:

All Instructions for the FGF368GSA

Customer:: Craig from FAYETTEVILLE, NY
Parts Used:: 316490000
Difficulty Level:: Really Easy
Total Repair Time:: Less than 15 mins
Tools:: Screw drivers

Oven would not reach temperature or it would finally reach temp but would not stay warm.

Pulled oven away from cabinet area
Unplugged oven from wall outlet
Removed screws to free top panel from back of oven
Removed screws to free lower panel from back of oven
Probe backing was now exposed
Unplugged probe from connector
Removed one screw from probe housing
Twisted probe housing counterclockwise then pulled probe out
Reversed the process to install probe
Plugged probe into connector
Reversed the panel removal process
Plugged oven back in to wall outlet
Turned on oven and tested with no further issue

1 of 2 people found this instruction helpful.

Was this instruction helpful to you?

Customer:: Deane from WINCHESTER, KY
Parts Used:: 316490000
Difficulty Level:: Really Easy
Total Repair Time:: 30 - 60 mins
Tools:: Nutdriver

temp. probe

Easy watched on line video

1 of 2 people found this instruction helpful.

Was this instruction helpful to you?

Customer:: Denise from Landover, MD
Parts Used:: 316538904
Difficulty Level:: Really Easy
Total Repair Time:: Less than 15 mins

light bilb went out

replaced it

2 of 6 people found this instruction helpful.

Was this instruction helpful to you?

Customer:: Terry from CHELSEA, OK
Parts Used:: 316490000
Difficulty Level:: Really Easy
Total Repair Time:: Less than 15 mins
Tools:: Nutdriver

I had a F31 code which means oven isn't working

Called fridgidaire and they told me the a F31 code means my temperature sensor is not working.
So I ordered one online. I installed it and I still have F31 code and still won't work. So what now? Do I trust them to tell me another part?

1 of 3 people found this instruction helpful.

Was this instruction helpful to you?

Customer:: Amy from Corona, CA
Parts Used:: 5304524341
Difficulty Level:: Really Easy
Total Repair Time:: Less than 15 mins

Lens cover for oven light broke.

Really a no brainer, but I do have to say that PartSelect customer service is excellent. My part was located and on it's way within a day and arrived a couple of days later.

0 of 1 people found this instruction helpful.

Was this instruction helpful to you?

Customer:: Peter from East Northport, NY
Parts Used:: 316541647
Difficulty Level:: Easy
Total Repair Time:: Less than 15 mins
Tools:: Socket set

burned

Unplugged the appliance. backed out the screws and removed the control panel and panel mounting brackets. reinstalled

0 of 1 people found this instruction helpful.

Was this instruction helpful to you?

Customer:: Robert R from Lewistown, PA
Parts Used:: 5304505695
Difficulty Level:: Easy
Total Repair Time:: Less than 15 mins

Two of theTop gas burners would not spark

Took 6 screws out holding the top on from the sides. Lifted the top front, popped out the spark module, Took 6wires off & reversed the processed to install the new one. I was really amazed when I ordered it Wednesday and it arrived on Friday. Believe me I bookmarked this site.

0 of 2 people found this instruction helpful.

Was this instruction helpful to you?

Customer:: Sharon from Foley, AL
Parts Used:: 5304524341, 316538904
Difficulty Level:: Really Easy
Total Repair Time:: Less than 15 mins

Broken globe in oven and burnt out light bulb

Easy as 1-2-3

0 of 5 people found this instruction helpful.

Was this instruction helpful to you?

Customer:: Mark from AuGres, MI
Parts Used:: 5304534663
Difficulty Level:: Really Easy
Total Repair Time:: Less than 15 mins
Tools:: Pliers, Screw drivers

oven would not stay on

remove belly pan ,pull draw out easy acsess remove screws and replace

Was this instruction helpful to you?

Customer:: Gary from Reno, NV
Parts Used:: 316270201
Difficulty Level:: Really Easy
Total Repair Time:: Less than 15 mins
Tools:: Screw drivers

handle broke

unscrewed old and screwed in new

Was this instruction helpful to you?

Customer:: John M. from PLEASANT PRAIRIE, WI
Parts Used:: 316490000
Difficulty Level:: Easy
Total Repair Time:: Less than 15 mins
Tools:: Nutdriver

no heat

Replaced the oven probe because a no heat problem. also had to replace the oven control. That was a bit expensive but still saved me hundreds not calling a serviceman. By the way, it works like new.....

Was this instruction helpful to you?

Customer:: Doug from Charlotte, NC
Parts Used:: 316220000
Difficulty Level:: Really Easy
Total Repair Time:: Less than 15 mins

Knob on gas range wore out

I just slapped the new one on.

Was this instruction helpful to you?

Customer:: Daniel from Provo, UT
Parts Used:: 316112005
Difficulty Level:: Really Easy
Total Repair Time:: Less than 15 mins
Tools:: Socket set

Needed to install an anti-tip bracket on my stove.

Moved the stove. Used the template to position the bracket. Put the supplied screws to attach bracket to the floor. Slid stove back into place. DONE!

Was this instruction helpful to you?

Customer:: Wayne from Olathe, KS
Parts Used:: 316270201
Difficulty Level:: Really Easy
Total Repair Time:: Less than 15 mins
Tools:: Screw drivers

Oven handle brittle and broke in two.when I dropped a pot on it.

It was easy once I got screws that work.Old screws and handle had machine screws that held handle on.Order screws with handle so you can install immediately...

Was this instruction helpful to you?

Customer:: Charles from Lake Mary, FL
Parts Used:: 316270201
Difficulty Level:: Really Easy
Total Repair Time:: Less than 15 mins
Tools:: Screw drivers

Broken Handle

Really easy to replace handle. However, because the new handle does not have the metal inserts to receive the attaching screws (!appearently a bit cheaper to make!), I am concerned that it will not last as long. I could find no reference to new attaching screws so used the old ones...hope it works!

Was this instruction helpful to you?

All Instructions for the FGF368GSA