Models > KF200GDH2 > Instructions

KF200GDH2 Frigidaire Range - Instructions

Jump to:

All Instructions for the KF200GDH2
91 - 105 of 113
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Customer:
Carol from Valley Cottage, NY
Parts Used:
318372210
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
burner burnt
It was just replacing the element no tools were required.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Robert from Waldorf, MD
Parts Used:
5303935058
Difficulty Level:
Easy
Total Repair Time:
1- 2 hours
Tools:
Screw drivers
Electric Range Element's Not Heating
Reviewed the online repair video a few times then got started. Although only two were bad, I replaced all four terminal blocks. I removed the range top instead of using the built in kick stands. this left me much more room to work and I was able to clean the top of the range really well before getting started. Wires for the back terminals where short and a little difficult to use after cutting off the old terminal blocks. The terminal block mounting option for my style range included with the repair kit would not allow me to utilize the screw for the third wire on the left rear burner. I used a drill to carefully widen the hole in the mount to make the original screw fit as there are no screws included with the kit. This added the extra time to complete the repair. Over all the repair was simple to complete but having to modify the terminal block mount was dissapointing considering the web site selected parts for my specific model number. Still a bargain compared to what a service call or new purchase costs. I will be reparing my ranges from now on.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Pat from Hendersonville, NC
Parts Used:
316048414, 316048413
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Could not find drip plates in local stores
Just put the drip plates in stovetop and worked perfectly
Was this instruction helpful to you?
Thank you for voting!
Customer:
Irene from Rochester, NY
Parts Used:
316048414, 316048413
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Replaced burner drip bowl
Very easy to remove the old drip bowl and replace with new ones.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Judith from Jewell, IA
Parts Used:
316048414, 316048413
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Needed new drip bowls
The hardest part of the job was cleaning under the old rings. Cook top looks new again!
Was this instruction helpful to you?
Thank you for voting!
Customer:
charles from El Paso, TX
Parts Used:
316067902
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Just had to replace the racks in the stove.
Did just want to comment on the customer service. It was great. The easiest to order that I have ever dealt with. Received prompt attention to the order and processing the same. JUST GREAT> Thanks
Was this instruction helpful to you?
Thank you for voting!
All Instructions for the KF200GDH2
91 - 105 of 113