Models > FLF334BGWH > Instructions

FLF334BGWH Frigidaire Range - Instructions

Jump to:

All Instructions for the FLF334BGWH

Customer:: Michael from Manasquan, NJ
Parts Used:: 316495901
Difficulty Level:: A Bit Difficult
Total Repair Time:: 15 - 30 mins
Tools:: Screw drivers

Bottom Panel of over rusted out.

Unplug the stove from the wall socket. Remove the oven door as shown in the instructions for replacing the door. This makes the job a lot easier. At the rear of the bottom panel there is a screw at each corner. Remove these screws, a screwdriver will loosen them, then remove by hand. If you have a convection oven remove the fan cover as this prevents the bottom panel from coming out. There is a screw at the top and the bottom of the cover. You can then gently lift the bottom panel at the rear and work it out of the front lip. Install the new bottom panel in reverse order.

Was this instruction helpful to you?

Customer:: June from Mt. Vernon, AL
Parts Used:: 316067902
Difficulty Level:: Really Easy
Total Repair Time:: Less than 15 mins

Old rusty worn out oven racks

Removed the old oven racks and put in the new ones.

Was this instruction helpful to you?

Customer:: KAREN from INDIANAPOLIS, IN
Parts Used:: 5304506004
Difficulty Level:: Easy
Total Repair Time:: 15 - 30 mins
Tools:: Nutdriver, Screw drivers

inside oven glass had cracked.

I got the ex husband to come over and take it apart and fix it, he said that it was a really easy repair to complete.

Was this instruction helpful to you?

Customer:: Lauren from Delta Junction, AK
Parts Used:: 316032411
Difficulty Level:: Easy
Total Repair Time:: 15 - 30 mins
Tools:: Screw drivers

oven would not maintain heat

We took out the old thermostat and replaced it with the new one....now we don't have to buy a new oven!!!!!

Was this instruction helpful to you?

Customer:: charles from El Paso, TX
Parts Used:: 316067902
Difficulty Level:: Really Easy
Total Repair Time:: Less than 15 mins

Just had to replace the racks in the stove.

Did just want to comment on the customer service. It was great. The easiest to order that I have ever dealt with. Received prompt attention to the order and processing the same. JUST GREAT> Thanks

Was this instruction helpful to you?

Customer:: Daniel from Provo, UT
Parts Used:: 316112005
Difficulty Level:: Really Easy
Total Repair Time:: Less than 15 mins
Tools:: Socket set

Needed to install an anti-tip bracket on my stove.

Moved the stove. Used the template to position the bracket. Put the supplied screws to attach bracket to the floor. Slid stove back into place. DONE!

Was this instruction helpful to you?

Customer:: James from Holly, MI
Parts Used:: 316032411
Difficulty Level:: Easy
Total Repair Time:: Less than 15 mins
Tools:: Pliers, Screw drivers

oven was not heating up to the right temps.

removed the old thermostat and replaced it with the new one. now it works great!

Was this instruction helpful to you?

Customer:: Maura from Hingham, MA
Parts Used:: 316109512
Difficulty Level:: Really Easy
Total Repair Time:: Less than 15 mins

Our original knobs were worn, ugly and disgusting...

I found the new knobs I wanted online through this website, I ordered 4 brand new ones. They came in the mail via FEDEX Ground and were and looked absolutely perfect! I love them, my husband loves them, they're awesome! Great job... :)

Was this instruction helpful to you?

Customer:: Bear from Royston, GA
Parts Used:: 316122100
Difficulty Level:: Really Easy
Total Repair Time:: Less than 15 mins

two burner caps missing from Frigidaire gas stove

part match perfect, right part right price good company

Was this instruction helpful to you?

Customer:: Ricardo from Brooklyn, NY
Parts Used:: 5304509706
Difficulty Level:: Really Easy
Total Repair Time:: 15 - 30 mins
Tools:: Pliers, Screw drivers

The Oven ignitor did not turn spark for the oven to turn on and heat up.

I pulled the top cover from inside the oven off and unscrewed 2 screws to remove the heat plate. After i unplugged the adapter for the old ignitor apart and unplugged 2 wires and removed 2 screws that hole the ignitor to the plate. i replaced with the new ignitor, screwed back in place , plugged the 2 wires and the adaptor plug in and i was done , in less that 30 mins.. I also saved $180 (Sears $260) on this do it yourself repair.. Thanks PartSelect for having the part in stock.... R Diaz (Bklyn N.Y.)

Was this instruction helpful to you?

Customer:: GARY from LIBERTY, MO
Parts Used:: 5304506004
Difficulty Level:: Really Easy
Total Repair Time:: 15 - 30 mins
Tools:: Screw drivers

Broken inner glass panel in oven

Bought a electric range/oven with a broken glass in the door cheaply because the owner didn't think they could fix the glass. I watched the video on You Tube on how to handle the spring loaded hinges and followed the steps as presented. The toughest part of the job was cleaning all the crud on all of the glass due to the gap in the inner glass. I had to use a square drive and a phillips head screwdriver to disassemble and reassemble the door. It took less than 30 minutes to complete the job and most of that time was cleaning the glass.

Was this instruction helpful to you?

Customer:: William from Saint Clair Shores, MI
Parts Used:: 5304534377
Difficulty Level:: Really Easy
Total Repair Time:: Less than 15 mins
Tools:: Screw drivers

Sliced Outlet Cord

I was replacing a range oven hood, so I pulled the oven away from the wall but left it plugged in. I removed the old oven hood, which had an exhaust pipe that was still mounted through the cupboard. While I was preparing the new oven hood the exhaust pipe fell out of the cupboard and cut the oven wire in half. I was able to find the part number on the existing cord and looked up on line. I ordered the part using 3-5 business days and it showed up in 2 days. I was able to attach the new cord, which had an easy clip plug, and secure back to the stove. Very easy and very inexpensive to do.

Was this instruction helpful to you?

All Instructions for the FLF334BGWH