CC3520SRA Crosley Range - Instructions

1. Turned off electricity to oven.
2. Unscrewed old oven element. Found it had burned through
on the underside.
3. Inserted & screwed in new oven element.

35 year old oven good to go.

Power off by unplugging appliance!
Remove the old element by removing one screw from each of the old element anchoring tabs.
Pull element away from back of oven approx. 3 inches to expose spade lug electrical connectors.
With the pliers, gently seperate the spade connector from the element connecting tab.
Remove old element.
Install new element in reverse order.
Plug appliance in, set oven to warm/low heat to test and burn off any metal preserveative from elemnt surface.
Check operation by allowing to heat for < 30 seconds. Oven element should start to warm and can be confirmed by breifly placing hand a few inches away from element to detect heat.
Turn oven off if satisfactory. Reset time on oven clock. Finis!!!!

unscrew 2 screws, pull 2 connectors off, put in new part in reverse order - easy fix.

Removed two screws that attach bake element to rear of oven. Slid off blade type connectors at each end. Slid connectors onto new element. Pushed element into place and reinstalled two screws. Tested. Perfect. Took longer to do this survey than to do the repair! The one day shipping service was a big plus.

Called Sears, repairman couldn't come for a week and would cost $129 for visit not including parts. Went to Sears repair store, part cost more than the part I had already found online and would take a week to arrive. Ordered the part online, paid for next day delivery, watched a video on how to replace. Had my oven back in two days and $59!!!

After noticing that our oven was not heating up, we talked to some other people and they said that we should try replacing the heating element. Replacing the heating element was as simple as removing two screws, pulling out the old element, reattaching the new element and putting back the two screws. One mistake I made was not unplugging the range before doing this repair and so I got a little electric shock before I was finished. After getting shocked I did unplug the range before continuing with the repair. The best part is that my oven now works again with no problem. This repair couldn't be any easier.

My husband unscrewed the old element and pulled out the wires and took the old element off and reconnected the new element and screwed it back in in less than five mins. Your video explained how to do it. The service was great. The price was good and it got here fast. I ordered it on Sunday and it was here by Wed.morning.

I am a 62 year old woman. All I had to do was unscrew the retaining screws on the back of the oven wall, pull the element out and unplug it. When the new one came, I did it in reverse. It took about five minutes. Ps: I did turn the breaker off first....

I was able to get on the website, find the part, and order it. It was delivered the next day. I followed the video and it was as easy as the video demonstrated that it was. As a single mother of two, being able to handle this on my own without the expense of hiring a repair person was a huge thrill! Thank You!

snaped them into oven cavity attached temp bulb job complete

unscrewed covers . unpluged heating element , pluged in new one , put covers back on. oh yeah unplug stove first.

unscrewed the element and pulled it out, then put the new element in.

simple as1-2-3

Remove the bottom rack from the oven. Pull the heating element straight back and out of the oven. Inserted the replacement burner in the opposite manner. Part was delivered in a timely manner.

1 Turn off power