CE3674XRW Crosley Range - Instructions

I ordered the part on Sunday night and it came on Wednesday. I watched the 'Partselect' video prior to doing the repair - the video got right to the repair and it gave me all the information (and confidence) I needed. It took me longer to clean the bottom of the oven than it did to make the actual repair. I can't imagine paying someone to do such an easy job. My kids had a great time playing with the bubble wrap from the box!

Unscrewed two screws holding element in place and pulled off the electrical wires to the element.( be sure to remove power to the stove)Put wires on new element and installed screws back in. Done

Shut off electricity to appliance then unpluged wiring from old element and pluged in new element.

After finding out my 2nd hand electric stove was not reaching the temperature I needed to bake my cookies I knew I had to either find out what was wrong & repair it or purhcase another stove. The baking element was the culprit and it was really easy to fix. I disconnected the power line to the stove, unscrewed the old element & pulled apart the contacts from the wires. I then reversed the process and was done in less than 30 minutes. I was extremely pleased with how fast my order was shipped - I ordered the part on Tuesday & the part was waiting for me on Thursday when I got off from work. Will definitely order from PartSelect again!

Pretty simple, except the element melted very close to one end, so the screw holding the element to the rear of the stove was partly melted also. Had to drill it out & used a nut & bolt to secure the new element.
Apart from that, it was a breeze. As others have done, I re-tightened the lugs that the element plugged into.
Suggest a "test heating" before using stove: mine had a strong odor on first use, fine afterwards

Removed old element (two screws) unclipped two wires. Clipped the two wires to the new element (one at each end), reinserted new element, replaced the two screws. Done. Oh, flipped the circuit breaker back on:-)

unscrewed the old baking element, took the yellow wire off, and put the yellow wire onto the new baking element and screwed it back onto the oven. Took less than 15 minutes.

I shut the breaker off at the main power box.
In the oven, I loosened two screws to remove the old element (parts now, after the burn-out). I pulled the old element out of the back wall of the oven to expose the wire connections. I detached the simple sliding wire connectors. Done with removal. I waited for the new element to arrive (one week). Installed easily. Turned on the breaker and baked a few potatoes. Very simple.

1. Unscrewed glass cover on bulb
2. Removed old bulb
3. Screwed in new bulb
4. Replaced glass cover
5. Mixed drink & baked cupcakes

1. Turned off electricity to oven.
2. Unscrewed old oven element. Found it had burned through
on the underside.
3. Inserted & screwed in new oven element.

35 year old oven good to go.

I watched the video provided by Part Select before I ordered the part. I removed the old element by taking out two screws and unplugging it from the wires. I put the new element in place, connected the wire to the right side and then opened up the back of the range to connect the left side. The repair was easy, but the video did not show that you had to connect the left side from the rear of the appliance. It was easy to figure out. The appliance works like a charm...no like an oven.

I removed the element from the back of the oven.Then i removed the wires from the bad element. I then attached the wires to the new element,and screwed it into place.

Watched the video provided and followed the instructions. I couldn't believe how simple it was to fix the problem! I ordered the part Sunday evening and it was sitting in front of my door Tuesday afternoon. Talk about service! I couldn't be more pleased with the convience of fixing my problem right from my own home. Thank You!

Disconnect the electrical cord, remove the oven racks, remove the screws holding the bake element with a screw driver, pull out the bake element, then replace it with the new element. Done!

Removed two screws that attach bake element to rear of oven. Slid off blade type connectors at each end. Slid connectors onto new element. Pushed element into place and reinstalled two screws. Tested. Perfect. Took longer to do this survey than to do the repair! The one day shipping service was a big plus.