Models > CREA600ACE > Instructions

CREA600ACE Admiral Range - Instructions

Jump to:

All Instructions for the CREA600ACE

Customer:: Phyllis from BROWNVILLE, NY
Parts Used:: W11665456
Difficulty Level:: Really Easy
Total Repair Time:: Less than 15 mins
Tools:: Wrench (Adjustable)

My original back leg broke because the floor is uneven. Had to pull it out several times.

Put the back of stove on blocks of wood to get high enough to screw the new leg in.

1 person found this instruction helpful.

Was this instruction helpful to you?

Customer:: Jeri from NEW RICHMOND, OH
Parts Used:: 74002312
Difficulty Level:: Very Easy
Total Repair Time:: Less than 15 mins
Tools:: Screw drivers

One of the broiler drawer guides broke

All I had to do was pull the drawer out and screw on the new part! Awesome experience...and it was so easy to find the part on the website, everything is very clear and with pictures to ensure where the part belongs...who could ask for more?

1 person found this instruction helpful.

Was this instruction helpful to you?

Customer:: Lowell from Hardin, KY
Parts Used:: WPW10196405, WPW10196406
Difficulty Level:: Really Easy
Total Repair Time:: Less than 15 mins

Couldn't find correct drip bowls that fit.

Removed old drip bowls, removed burners installed new drip bowls,installed burners. They fit perfect and I received them two days after ordering.

2 of 4 people found this instruction helpful.

Was this instruction helpful to you?

Customer:: Paul from Yukon, OK
Parts Used:: WP74003019
Difficulty Level:: Easy
Total Repair Time:: Less than 15 mins
Tools:: Screw drivers

snapped element

switch off the range. undo the two screws & unplug the two tabs. Replace with new element, connect two tabs, screw back in place. done!
recieved my replacement part the next day after ordering

1 person found this instruction helpful.

Was this instruction helpful to you?

Customer:: John from Fishers, IN
Parts Used:: WP74003019
Difficulty Level:: Easy
Total Repair Time:: 15 - 30 mins
Tools:: Screw drivers

Lower burner not heating:

Ordered element and recieved in two days(yea). Removed back cover from unit. Removed two wire slide on wire clips. Then went inside oven cavity and removed two screws holding element intact. The element slid out. Installed element, re-installed two screws to hold element intact. Attached wire clips back on to element, re-attached back cover. Plugged unit back in and it worked perfectly. Eazy-peezy lemon squeezy.

John
Johnny on the Spot Home Repairs
Fishers, Indiana 317-997-3600

1 person found this instruction helpful.

Was this instruction helpful to you?

Customer:: BETH from COUNCE, TN
Parts Used:: 12001676
Difficulty Level:: Really Easy
Total Repair Time:: 15 - 30 mins
Tools:: Pliers, Screw drivers

burner receptacle failed (stove over 30 years old)

Took out burner (pulls out) Took out one screw that holds recep. in, cut the two old wires and attached new wires with wire nuts included in the new package.

1 person found this instruction helpful.

Was this instruction helpful to you?

Customer:: wesley from ODENVILLE, AL
Parts Used:: WP7407P182-60
Difficulty Level:: Really Easy
Total Repair Time:: 30 - 60 mins
Tools:: Pliers, Screw drivers

original fixture required bulb - this fixture (all-in-one) was great

Pulled range out from cabinet-wall to get to back side, everthing was clearly exposed tlhen. Just a matter of installing new fixture, putting back on, reconnected power source - put range back in proper place.

1 person found this instruction helpful.

Was this instruction helpful to you?

Customer:: James from Hoyt Lakes, MN
Parts Used:: 8009, WP74003019
Difficulty Level:: Easy
Total Repair Time:: 30 - 60 mins
Tools:: Screw drivers

Wife said stove was on fire - Oven element shorted.

Removed the old element by removing 2 screws and disconnecting two solderless connectors. One solderless connector was melted in two. I had to remove the rear panel and cut the old connector off and crimped on a new solderless connector. The time required was lengthened due to trip to the hardware store to get a new connector. While I was fixing the oven element my wife replaced the oven light.

1 person found this instruction helpful.

Was this instruction helpful to you?

Customer:: Robert from LEXINGTON, MA
Parts Used:: WP74003019
Difficulty Level:: Very Easy
Total Repair Time:: 15 - 30 mins
Tools:: Screw drivers

The bake oven element burned out

Removed two screws and disconnected the element. Reconnected the new element and reinstalled the screws

1 person found this instruction helpful.

Was this instruction helpful to you?

Customer:: Frances from MOREHEAD, KY
Parts Used:: WP74003019
Difficulty Level:: Very Easy
Total Repair Time:: 15 - 30 mins
Tools:: Screw drivers

replace broken bake element

Unplugged the range. Took our the oven shelves. Unscrewed the bars holding the broken bake element to the back of the oven wall. Gently pulled out the wiring to which the bake element is attached. Slipped the ends of the broken bake element off the ending on the wiring. Then slipped the ends of the new bake element over the ends on the wiring. Then pushed the wiring with attached bake element back into their position behind the oven wall and attached the bars holding the bake element to the back of the oven wall. This is really easy because it is exactly like the on-line video, for I am a 75 year old female with little technical experience.

1 person found this instruction helpful.

Was this instruction helpful to you?

Customer:: Sandra Collignon from SANTA CLAUS, IN
Parts Used:: WPW10196405
Difficulty Level:: Really Easy
Total Repair Time:: 30 - 60 mins

Drip Pans were stained and burned on.

Replaced drip pan. Notch did not want to match the burner notch. Was a close fit bit with a little pressure made it work.

1 person found this instruction helpful.

Was this instruction helpful to you?

Customer:: Tom from ROCKTON, IL
Parts Used:: WP74003019
Difficulty Level:: Really Easy
Total Repair Time:: 30 - 60 mins
Tools:: Screw drivers

Replace the lower oven element

Unplug the 220 cord..remove rear metal back ( 7-8 Ph/screws)... disconnect the red & yellow connectors from the back of the lower element. Remove-the-lift-off Oven door. Remove the two Ph/screws (one on either end of the element) At the very rear of the oven. Install the new element and reverse the about to reassemble.

1 person found this instruction helpful.

Was this instruction helpful to you?

Customer:: PATSY from HALLWOOD, VA
Parts Used:: WP74003019
Difficulty Level:: Really Easy
Total Repair Time:: 15 - 30 mins
Tools:: Screw drivers

Lower element out-oven wouldn't heat

I removed the two screws at the rear of the oven and pulled out the existing element, plugged in the new element, pushing it back in place and mounted the screws back in the bracket. I then made the "Tim the Tool Man" grunt noises feeling very proud that I am now officially a Handy Woman!

1 person found this instruction helpful.

Was this instruction helpful to you?

Customer:: Jonathan from Havertown, PA
Parts Used:: WP74003019
Difficulty Level:: Really Easy
Total Repair Time:: 15 - 30 mins
Tools:: Pliers, Screw drivers

Oven wouldn't heat

Easiest repair ever.

#1 - Turn off power (or you will get electricutued).
#2 - Unscrew back of heating elements
#3 - Disconnect wires (may need pliers)
#4 - Attach new heating element
#5 - Put in screws

Everything took 15 mintes max.

1 person found this instruction helpful.

Was this instruction helpful to you?

Customer:: Robert from Jacksonville, FL
Parts Used:: WP74003019
Difficulty Level:: Easy
Total Repair Time:: 15 - 30 mins
Tools:: Screw drivers

Bottom Element Burned out

Turned off all power to range.
Removed two Philip head screws
Gentle pulled unit Element forward
Removed two push on connectors
(Do not let wires fall back into oven holes)

Reversed the process.

1 person found this instruction helpful.

Was this instruction helpful to you?

All Instructions for the CREA600ACE