Models > CRPA200AXL > Instructions

CRPA200AXL Admiral Range - Instructions

Jump to:

All Instructions for the CRPA200AXL
16 - 30 of 52
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Customer:
Rhoda P. from Secaucus, NJ
Parts Used:
WP3413F018-19, WP3401F075-19
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
I needed a broiler pan
I took the broiler pan out of the shipping container and put it in the oven.
4 of 9 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Donald from Peebles, OH
Parts Used:
WP7711P135-60
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Install valve knobs
This was not a difficult task. I just slid the valve knob on the shaft, repair was complete. This was a very easy diy project.
3 of 6 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Barbara L. from Tewksbury, MA
Parts Used:
WP7711P135-60
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Broken burner knobs on stove.
Just replaced the old burner knobs with the new !!!
2 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Pam from Grand Ledge, MI
Parts Used:
1430283
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
rusty drip trays
finally after years of searching for trays of this size with no luck in local stores, I was able to find and purchase 2 sets, one set for my daughter, which we were able to put in place to clean up our stoves and make them more appealing . Thank-you for your prompt service.
2 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Clayton from Shortsville, NY
Parts Used:
WP74002419
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
needed a new knob
pulled the old one off and push the new one on
2 of 4 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Marvin from Pahrump, NV
Parts Used:
WP74002419
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
new knob
Pulled one knob off and pushed the other one on.
2 of 4 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Kathy from Fremont, OH
Parts Used:
WP74002419
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Broken Thermostat Knob
After ordering 3 or 4 different knobs for replacement, I found the one I needed. I did not have the oven model number at first...now everything is working fine. No tools, just push the knob into place. Thanks!
2 of 4 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
FRANCES from AFFTON, MO
Parts Used:
W11400301
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
35 year old range. grates too dirty to clean. Parts Select had exact replacement grates. Perfect fit.
Easy, removed from box, put in place on range. Happy customer. Good company to find exact replacement parts.
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Sara from FORT RIPLEY, MN
Parts Used:
WP74002419
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Oven knob was broke
Got the new one and put it on
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
James R. from Corona, CA
Parts Used:
3412A004-19, 1430283
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
The burners were old and loose
First, I raised the top. Extracted the holding pin, Then replaced the burner. Then reinserted the holding pin. Two minutes top's.
2 of 4 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Larry from LAWTON, MI
Parts Used:
WP7711P135-60
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Tools:
Pliers
my knobs were broken on 30 year old range
I took a pair of channel locks pulled the old one off pushed the new one on they look really nice and was glad they had the parts for such an old stove. thank you,now my hubby is glad so he doesn't have to buy a new stove.
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Patricia from SAN LEANDRO, CA
Parts Used:
WP74002419
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
unable to see the numbers on the old knob.
ordered it had to line it up then just popped it on.
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Judy from ARDSLEY, NY
Parts Used:
WP74002419
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
The oven control know wore out.
I purchased a knob that I was hoping might fit properly.
Unfortunately I did not find anything that matched the knob we had originally. We use the knob that I purchased to turn the oven on and off, but the shaft channel is much longer than the shaft on the stove, so the knob sits high above the other knobs. I wish that I could find a knob to accommodate the
shaft on the stove. I have considered purchasing an addition kinob and trying to saw off part of the shaft if the plastic can be shortened without shattering.
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Tara from ALBANY, NY
Parts Used:
WP5504M003-19
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
The oven bottom was warped and could not be positioned properly in the oven.
Removing the old oven bottom was easy...as it was already outside of its slots. Installing the new one was pretty easy. I placed the oven bottom in the front slots first...then the rear slots...no tools necessary.
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Jacob from LITTLE CANADA, MN
Parts Used:
W11400301
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Simply remove and install new parts
Overall, it was painless and easy with zero problems
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
All Instructions for the CRPA200AXL
16 - 30 of 52