KICV167RSS0 KitchenAid Range Hood - Instructions
Jump to:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- Sachin from Mason, OH
- Parts Used:
- WPW10252088
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
Replace bulb in Kitched-aid hood
extremely easy install.
1) Using philips screw driver removed 2 screws
2) pused on the edge of bulb o release it . This is the only tricky part as the bulb normally does not come out easily and there is no clear instructions on how to release it.
3 ) inserted the new bulb and the whole thing was done in less that 10 minutes
1) Using philips screw driver removed 2 screws
2) pused on the edge of bulb o release it . This is the only tricky part as the bulb normally does not come out easily and there is no clear instructions on how to release it.
3 ) inserted the new bulb and the whole thing was done in less that 10 minutes
Was this instruction helpful to you?
Thank you for voting!