JN322V1AD General Electric Range Hood - Instructions
Jump to:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- Helen J. from Landisburg, PA
- Parts Used:
- WB02X10700
- Difficulty Level:
- Easy
- Total Repair Time:
- Less than 15 mins
Replace grease and oder filter
To replace a filter, on my range, i just pull down on the old ,and push up tp place the new one in. the were no screws ,to take out. I would like to say, that the time it took , to place my order and recive it was great. i could not be more pleased . i will be in touch, again, whenever, i need a part ! thank you.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Marsha from Jacksonville, FL
- Parts Used:
- WB02X10700
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Really old filthy filter
Popped out the old one and inserted the new one. Very quick and easy, less than 1 minute. I was very impressed with the delivery of my new filter from PartSelect. It arrived the very next day...that was simply amazing to me.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- John from Cumberland, MD
- Parts Used:
- WR60X114
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Pliers
broken fan blade in the freezer compartment
Unplugged frige, removed top shelf, pulled broken fan blade off. Replaced with fan blade just purchased from PartSelect. Very simple repair. Orderd and recieved the right part.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Jessie from West Chester, PA
- Parts Used:
- WB02X10700
- Difficulty Level:
- Easy
- Total Repair Time:
- Less than 15 mins
I destroyed previous one scrubbing too hard
I stood on a kitchen step ladder, pulled old one out with an upward and outward pull. Held new one on the sides, seated the bottom first, then snapped the new one into the top clip.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Marnie from Denver, CO
- Parts Used:
- WR60X114
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Pliers
a fan blade broken causing it to make a loud noise
we took off the old one and replaced it.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Yvonne from ANN ARBOR, MI
- Parts Used:
- WB02X10700
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
dirty filter
I just needed a new filter for my stove overhead hood.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Yolanda from Fernley, NV
- Parts Used:
- WB02X10700
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
replace filter
just replaced the filter on my range exhaust
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Lauraine from Rocky Hill, CT
- Parts Used:
- WR60X114
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
family member melted fan with hair dryer
Unplugged fridge.Removed 2 screws holding a panel. After panel removed took off old fan and inserted new. Quite simple.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- John from Cumberland, MD
- Parts Used:
- WR60X114
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Fan blade broken
Removed the broken fan blade (just pulled off) and replaced with part purchased PartSelect. Very easy repair, no tools required.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Amit from Succasunna, NJ
- Parts Used:
- WB23X5097
- Difficulty Level:
- Easy
- Total Repair Time:
- 1- 2 hours
- Tools:
- Pliers, Socket set
The switch burned out
Just made sure which wire goes to which terminal before I removed the burned switch. Then it was relatively easy to connect the terminals after the new switch is installed.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Stephen from Katy, TX
- Parts Used:
- WB02X10700
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
change filter
unscrewed old filter, replaced and installed new one
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Linda from Brentwood, TN
- Parts Used:
- WB02X10700
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Needed new filter
Easy. Took old filter out, put new one in.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- BARBEL from LAGUNA WOODS, CA
- Parts Used:
- WB02X10700
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Ordered a combination Grease and Odor Filter
After spending days searching at Sears, J.C.Penny and Macy’s, I finally used my computer. 1) Found part select, found the model and part number. 2) Ordered on line. 3) 4 days later it arrived at my door. 4)Removed old filter, Installed new filter. It was over in less than 5 minutes. From now on, I will always look on line first. Thank you for such a painless transaction.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Robert L. from Eldred, PA
- Parts Used:
- WR60X114
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Screw drivers
Noisy fan
Emptied freezes, turned off power, took floor of freezer out [4 screws ], took two screws out of fan mounts and replaces fan. Reassembled by reverse process. Simple
Was this instruction helpful to you?
Thank you for voting!