ZV1050SF2SS General Electric Range Hood - Instructions
Jump to:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- Sharon from Montgomery, TX
- Parts Used:
- WB25X37025
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Screw drivers
lights wouldn't work
Two years ago (approximately) the lights quit working. I replace the bulbs with ones from the local hardware store; didn't work; replaced fuses; didn't work; replaced circuit board, didn't work; finally, ordered expensive recommended part and replaced fuses purchased at local dealer, WORKS! The bulbs I purchased locally were 50watt not 20. I had 2 different repairmen (one GE rep) look at it,and neither one solved the problem. But it's fixed now!
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Tyrone from San Bernandino, CA
- Parts Used:
- WB02X10400
- Difficulty Level:
- Easy
- Total Repair Time:
- 30 - 60 mins
- Tools:
- Screw drivers
Light Socket Not Working
Removed unit by removing two mounting screws attaching socket to range hood. Removed adjacent filter panel, pulled socket out through opening, and removed two screws attaching ceramic insulation base to socket. Reinstalled in reverse order.
Was this instruction helpful to you?
Thank you for voting!