JVX5360DJ2WW General Electric Range Hood - Instructions
Jump to:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- Walter from HARRISBURG, PA
- Parts Used:
- WB02X27240
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
New Range Hood not vented
This was an easy repair. The range hood was a GE 30" in Slate. Bypassing the venting option required installation of the charcoal filter. At first, the filter installation holes did not line up perfectly. But the filter is pretty much infinitely adjustable by rotating the adjustable ring. Note: the shipped part (charcoal filter) comes with no instructions for installation....but it is easily figured out by adjusting the rotating ring. The only tool needed is a #2 Phillips screw driver. An extremely easy repair, save yourself the extra money for professional installation.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- T from MACCLENNY, FL
- Parts Used:
- WB18X27245
- Difficulty Level:
- Easy
- Total Repair Time:
- 1- 2 hours
- Tools:
- Screw drivers
Lamp socket broke.
Pulled stove out. Turned switch off to hood lights. Checked power with power indicator tool, make sure off. Remove plate. Remove socket, cut wires, place wires in new socket . Replace plate.
Was this instruction helpful to you?
Thank you for voting!