Models
>
PP258TP
PP258TP (TYPE 3) Poulan Pole Saw
Jump to:
Find Part by Name
Keep searches simple, eg. "belt" or "pump".
Diagrams for PP258TP
Viewing 3 of 3
Keep searches simple, eg. "belt" or "pump".
$9.32
This is a single fuel filter found in numerous types of lawn and garden equipment that have small engines. The fuel filter cleans the fuel before making its way to the carburetor, thus preventing buil...
In Stock
Order now and your part arrives by Apr 6
$15.54
The fuel line carries the fuel from the fuel tank into the carburetor. This particular fuel line can be used in various lawn and garden equipment, such as trimmers and blowers. This clear rubber part ...
In Stock
Order now and your part arrives by Apr 6
$6.51
It is a genuine item that is supplied by the original equipment manufacturer for use with Craftsman chainsaws. This is the special nut that helps to secure the bar. It provides an identical replacemen...
In Stock
Order now and your part arrives by Apr 6
$10.89
This part includes one purge bulb, also known as a primer bulb. It is supplied by the manufacturer to be a direct replacement for the original. The purge bulb is pressed, and this removes the air from...
In Stock
Order now and your part arrives by Apr 6
$12.41
This is an authentic replacement part manufactured for use with Craftsman chainsaws and a pole pruner. The adjustment screw kit is used to change the tension of the chain around the bar. This adjustme...
In Stock
Order now and your part arrives by Apr 6
This is a genuine Poulan replacement part, it is sold individually. The purpose of the 530038682 Trigger is to control the speed at which the spool and line rotates on the model shown below. It is con...
No Longer Available
$7.76
This is an authentic replacement part manufactured for use with chain saws from Craftsman. This part helps adjust the tension on the bar, which loosens or tightens the chain. You may need a screw dri...
In Stock
Order now and your part arrives by Apr 6
$6.51
This is a standard hardware which has multiple applications based on your tool. It is sourced from original equipment manufacturer for use with a variety of power equipment. Please refer to diagrams f...
In Stock
Order now and your part arrives by Apr 6
$6.51
This authentic component is an OEM part which is designed for use with Poulan chainsaws. It is an important component of the bar adjustment mechanism which helps to secure the screw. This is an identi...
In Stock
Order now and your part arrives by Apr 6
This is an Authentic OEM fuel tank assembly commonly used on Gas Trimmers. It is made out of Plastic and it includes the fuel lines, fuel cap, and fuel filter. It is very important to replace the fuel...
No Longer Available
$6.51
This is an authentic OEM sourced replacement piston ring used on gas Trimmers and blowers. A worn or broken piston ring will allow combustion gases to escape the seal and enter the crankcase, causing...
In Stock
Order now and your part arrives by Apr 6
$58.36
This is a genuine OEM replacement part, it is sold individually. It is used on specific Gas Trimmers. The purpose of this part is to mix air and gas before the fuel mix goes to the engine. If the engi...
In Stock
Order now and your part arrives by Apr 6
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Common Problems and Symptoms for PP258TP
Viewing 3 of 3Will Not Start
Fixed by these parts
How to fix it
Engine stops after a few seconds or minutes
Fixed by these parts
How to fix it
Chain comes off guide bar
Fixed by these parts
How to fix it
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- Steve from SALEM, OH
- Parts Used:
- 530069599
- Difficulty Level:
- Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Pliers
Broken fuel line
Removed broken fuel line from gas tank. Threaded new line into tank routed it to the carb and cut to length needed. Attached to the carb.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Rosanne from BRIDGEWATER, VA
- Parts Used:
- 545227901
- Difficulty Level:
- A Bit Difficult
- Total Repair Time:
- 30 - 60 mins
Clogged muffler
Remove the 4 screws holding the rear motor casing. Then you can take the easy route and drill through the front motor housing with a 3/8 to 1/2 bit in order to access the front muffler screw. If you want to work harder you must remove the motor from the shaft, remove the clutch assembly (this requires a long 15t torx bit, removing the spa
... Read more
rk plug to stuff the piston with rope or rag to seize up the piston, and then removing the front motor casing to access the front muffler screw). Once you access both muffler screws remove them with the t20 torx driver. Install the new muffler with the small gasket inside the housing, and the larger gasket/heat shield between the muffler and the motor.
Read less
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Joseph from COLLEGEVILLE, PA
- Parts Used:
- 530150552
- Difficulty Level:
- Very Difficult
- Total Repair Time:
- 30 - 60 mins
I lost the oil cap for lubing blade
I ordered new one, it took a while to arrive and I found the diameter threads were wrong, seems like a simple part to replace, guess not
Was this instruction helpful to you?
Thank you for voting!