SLS25XP Senco Nailer - Parts

This authentically made retainer is for nailers. It is designed to retain or fasten the retaining pins and is attached to the pins by pressing down on the beveled end. It is sold individually.

This is a genuine OEM seal for a nailer. It is located on the valve assembly and provides an air-tight seal. If you notice the sound of air leaking, it could be due to a damaged seal. Due to its rubbe...

This is an Authentic OEM replacement part for use with Senco Nailers/Staplers. This item is made out of Rubber and it is Sold Individually. The purpose of this part is to create a seal so air does not...

The part is an OEM from the Senco manufacturer. The plastic seal is made for use with several nailer devices. This item is fitted onto the valve assembly, providing protection from friction. A hex key...

This seal is a high quality item designed for use with Senco staplers and nailers. This is one of the seals for the cylinder sleeve. Over time these rubber seals tend to become brittle and crack allow...

This pin is an OEM direct from Senco. The metal component is made for use with several pneumatic nailer devices. This feature is fastened to the link, securing the trigger to the main body assembly. T...

This is genuine Senco replacement cushion that is designed for use with staplers. It is attached to end of the safety element to prevent the material that it is being used on from getting marred or de...

This is an authentic Senco replacement part for use with the SLS25XP wire stapler. This gasket is critical to form a seal between the spacer and the valve assembly. It is recommended to replace the se...

It is an authentic OEM part which is made for use with Senco nailers and staplers. This is the special pin which secures the latch assembly. If the hardware is missing or is damaged, this will provide...

This durable seal is an authentic OEM replacement part that is specially produced for Senco nailers and staplers. This is one of the seals for the retainer, over time these rubber items tend to shrink...

This item has been sourced from the original manufacturer to be used with pneumatic finishing nailers and staplers from Senco. The metal spring is part of the magazine assembly and is used to put tens...

This is an authentic OEM sourced replacement part which is specially designed for use with Senco staplers. It helps to distribute the pressure and provide an air-tight seal between connected parts, pl...