NR83A5 Hitachi Nailer - Parts

This is an authentic OEM part. The 'c' gasket is made for use with several nailer devices. Constructed of metal, this item is fitted between the exhaust piece and the exhaust valve, providing protecti...

This is a ribbon spring, which consists of a metal spring and plastic insert in the center. It is OEM-sourced and is sold individually. The ribbon spring is part of the magazine assembly of a nailer, ...

This is a genuine manufacturer-sourced replacement part which is specially designed for use with Hitachi nailers. It helps to distribute the pressure evenly and provide a tight seal between connected ...

This is an OEM Hitachi part directly sourced from the manufacturer for use in nailers. The adjuster spring fits between the adjuster and the pushing lever. It is a really small part that will need to ...

This screw is generally used to secure the handle arm, for correct location and use of this hardware make sure to check appropriate diagrams of your unit. It is a genuine replacement part that is supp...

This is a genuine OEM part. The Hitachi hex. socket hd. bolt (w/sp. washer m6 x 25) is compatible with many nailer devices. The metal bolt and washer helps to secure the exhaust cover to the body. Thi...

This is a genuine item that is supplied by the original equipment manufacturer for use with Hitachi nailers. It is an identical replacement for a missing or a faulty Guard A that was installed on a ne...

This is an original part from Hitachi. The metal spring is made for use with several nailer devices. This item is fastened onto the pushing lever, allowing the operator to drive staples into project m...

This is an original Hitachi replacement par manufactured for use with pneumatic nailers. O-rings can wear out from normal use, it is recommended to replace worn o-rings for proper usage of a nailer. T...

This genuine manufacturer sourced replacement part is specially designed for Hitachi nailers. This part is installed on top of the piston/connecting rod. Its purpose is to create a seal in the cylinde...

This is an authentic Hitachi replacement part that has been sourced from the original manufacturer to be used with pneumatic nailers. The roll pin is used to mount the valve guard to the pushing lever...