Models > 5KSM95CWH0 > Instructions

5KSM95CWH0 Whirlpool Mixer - Instructions

Jump to:

All Instructions for the 5KSM95CWH0

Customer:: Dallas from Atlanta, GA
Parts Used:: WPW10112253
Difficulty Level:: A Bit Difficult
Total Repair Time:: 15 - 30 mins
Tools:: Pliers, Screw drivers

Broken worm gear

Knob fell out of the front of the mixer into the bowl and jammed the beater. This caused the motor to strip the plastic worm gear. Open unit to investigate and found about 4 teeth missing out of the worm gear. Ordered a replacement. Installed the new gear once received in about 30 minutes. Wife is now happy again. Just need to make sure you pack enough gease into the new gear before reassembling the unit.

Was this instruction helpful to you?

Customer:: Ashok from Sterling, VA
Parts Used:: WPW10112253
Difficulty Level:: Really Easy
Total Repair Time:: 30 - 60 mins
Tools:: Screw drivers

The worm gear was damaged

I how the video for replacing the worm gear on your website. It help me a lot. I followed step by step instruction display on video. It was great help.

Was this instruction helpful to you?

Customer:: Pete from Tracy, MN
Parts Used:: WPW10112253
Difficulty Level:: Really Easy
Total Repair Time:: Less than 15 mins
Tools:: Screw drivers

Plastic worm gear stripped

The plastic worm gear was stripped,I took it apart first then cleaned out all the old grease so when the new part came it together like a charm.

Was this instruction helpful to you?

Customer:: Lawrence from Craryville, NY
Parts Used:: WP9704329
Difficulty Level:: Really Easy
Total Repair Time:: Less than 15 mins

wire whip brokrn

Just screwed it in

Was this instruction helpful to you?

Customer:: jennie from cupertino, CA
Parts Used:: WPW10674618
Difficulty Level:: Really Easy
Total Repair Time:: Less than 15 mins

Lost dough hook so no repair

Just put it on and my challah was perfect!!

Was this instruction helpful to you?

Customer:: Deanna from Saint Joseph, IL
Parts Used:: WPW10672617
Difficulty Level:: Really Easy
Total Repair Time:: Less than 15 mins

Coating on original flat beater was cracking.

I just replaced my old flat beater with the new one. It fit and worked perfectly.

Was this instruction helpful to you?

Customer:: Ernet from Birmingham, AL
Parts Used:: WPW10672617
Difficulty Level:: Really Easy
Total Repair Time:: Less than 15 mins

No repair I purchased a part.

The part fit great! PS. I may need to buy a gasket to go around my refrigerator door. I have an Amana Model #THI1853W, Serial No. 9502301998. Do you have instructions on how to install this gasket?

Was this instruction helpful to you?

Customer:: Linda from Lynden, WA
Parts Used:: WP9709194
Difficulty Level:: Really Easy
Total Repair Time:: Less than 15 mins

Thumb screw

the plastic covering the thumb screw cracked almost half way and lost the piece....so the new one is being used to replace this old one...very easy to install

Was this instruction helpful to you?

Customer:: Tiffany from San Antonio, TX
Parts Used:: WP16910
Difficulty Level:: Really Easy
Total Repair Time:: Less than 15 mins

Pin fell out of neck

Placed pin in the hole...some wiggling had to be done for a tight fit. Installation complete!

Was this instruction helpful to you?

Customer:: Robert from Belle Fourche, SD
Parts Used:: WPW10674618
Difficulty Level:: Really Easy
Total Repair Time:: Less than 15 mins

the dough hook was chipped

replaced

Was this instruction helpful to you?

Customer:: Lois from Albuquerque, NM
Parts Used:: WP9704329
Difficulty Level:: Really Easy
Total Repair Time:: Less than 15 mins

Wire Whip was coming apart

Replaced it with a new part. No installation or repair to maching was necessary

Was this instruction helpful to you?

Customer:: Frank from Bethlehem, PA
Parts Used:: WP240309-2
Difficulty Level:: Really Easy
Total Repair Time:: 30 - 60 mins
Tools:: Pliers, Screw drivers

worn teflon worm gear

it was a kitchen aid dough mixer, had to take the top portion off and replace the assembly with a new one that holds the teflon gear. You can purchace the gear only and it becomes less expensive, but at the time I didn't take the chance cause the greese was there and didn't want to take a chance. Its a simple repair by removing some cotter pins and phillips head screws.

Was this instruction helpful to you?

Customer:: Thomas from Dickson, TN
Parts Used:: W11192794, W11192794
Difficulty Level:: Really Easy
Total Repair Time:: 15 - 30 mins
Tools:: Pliers, Screw drivers

Replaced main gears

1. Removed the mixer from the base by removeing the pivot pin at the mixer base support. 2. removed the retainer ring from the housing. 3. removed the pin from the shaft. 4. removed 5 philips machine screws from the round base. 5. removed the round base from the mixer housing. 6. removed the o-ring from the shaft. 7. removed the shaft and large worm/pinion gear from the shaft. 8. pressed out the pinion drive gear from the mixer. The reverse operation repaired the mixer to new condition.

Was this instruction helpful to you?

Customer:: Dean from Fairfax, VA
Parts Used:: WPW10191926
Difficulty Level:: Really Easy
Total Repair Time:: Less than 15 mins
Tools:: Screw drivers

Mixer bowl was slipping off the base when in use

Replacing the base retaining bracket(what KitchenAid calls the screw cap) solved the problem immediately. The entire replacement effort took no more than a minute requiring removing 3 screws, discarding the old base, putting in the new one, and putting the screws back in. PartSelect was very easy to do business with. They shipped the part the day I ordered it and it arrived as scheduled. Can't be easier than that.

Was this instruction helpful to you?

Customer:: Pam from Huntley, IL
Parts Used:: WPW10672617
Difficulty Level:: Really Easy
Total Repair Time:: Less than 15 mins

broken glass shelf

Great! Got the right part, the first time- did not break in shipping. Your web site made it very easy to pick out what I needed.

Was this instruction helpful to you?

All Instructions for the 5KSM95CWH0