All Installation Instructions for KitchenAid Mixer 9KSM150PSWH5

Customer:: Deanna from Saint Joseph, IL
Parts Used:: WPW10672617
Difficulty Level:: Really Easy
Total Repair Time:: Less than 15 mins

Coating on original flat beater was cracking.

I just replaced my old flat beater with the new one. It fit and worked perfectly.

Was this instruction helpful to you?

Customer:: Dean from Fairfax, VA
Parts Used:: WPW10191926
Difficulty Level:: Really Easy
Total Repair Time:: Less than 15 mins
Tools:: Screw drivers

Mixer bowl was slipping off the base when in use

Replacing the base retaining bracket(what KitchenAid calls the screw cap) solved the problem immediately. The entire replacement effort took no more than a minute requiring removing 3 screws, discarding the old base, putting in the new one, and putting the screws back in. PartSelect was very easy to do business with. They shipped the part the day I ordered it and it arrived as scheduled. Can't be easier than that.

Was this instruction helpful to you?

Customer:: Pam from Huntley, IL
Parts Used:: WPW10672617
Difficulty Level:: Really Easy
Total Repair Time:: Less than 15 mins

broken glass shelf

Great! Got the right part, the first time- did not break in shipping. Your web site made it very easy to pick out what I needed.

Was this instruction helpful to you?

Customer:: Lee from Valencia, CA
Parts Used:: WP16910
Difficulty Level:: Easy
Total Repair Time:: Less than 15 mins
Tools:: Nutdriver, Pliers

The head of my machine was sagging

and I thought replacing the hinge pin would fix it, I used an awl to push out the old pin then used the new pin to push the old one all the way out. That did not fix the problem. Went to a store to look over a new one and saw that the screw under the head at the hinge point on the new machines was not screwed in tight. Turns out that screw is the "bumper" for the head against the neck, so the head is held back by the screw. FIXED

Was this instruction helpful to you?

Customer:: PJ from Rome, GA
Parts Used:: WP9709194
Difficulty Level:: Really Easy
Total Repair Time:: Less than 15 mins

Broken Part to KitchenAid Mixer

Great experience. Reasonable cost. Quick delivery. Would certainly use PartSelect again

Was this instruction helpful to you?

Customer:: Gennette from Yuba City, CA
Parts Used:: WPW10672617
Difficulty Level:: Really Easy
Total Repair Time:: Less than 15 mins

The Coating On My Flat Beater Had Chipped; Did Not Think It Was Safe Continue Using.

It was actually not a repair problem; just a replacement of a part. I ordered it one day and the next day the part was here. I have never had such a quick turn around in anything I have ordered. Thank you!!!!

Was this instruction helpful to you?

Customer:: Robert from Belle Fourche, SD
Parts Used:: WPW10674618
Difficulty Level:: Really Easy
Total Repair Time:: Less than 15 mins

the dough hook was chipped

replaced

Was this instruction helpful to you?

Customer:: Linda from Lynden, WA
Parts Used:: WP9709194
Difficulty Level:: Really Easy
Total Repair Time:: Less than 15 mins

Thumb screw

the plastic covering the thumb screw cracked almost half way and lost the piece....so the new one is being used to replace this old one...very easy to install

Was this instruction helpful to you?

Customer:: Lois from Albuquerque, NM
Parts Used:: WP9704329
Difficulty Level:: Really Easy
Total Repair Time:: Less than 15 mins

Wire Whip was coming apart

Replaced it with a new part. No installation or repair to maching was necessary

Was this instruction helpful to you?

Customer:: Tiffany from San Antonio, TX
Parts Used:: WP16910
Difficulty Level:: Really Easy
Total Repair Time:: Less than 15 mins

Pin fell out of neck

Placed pin in the hole...some wiggling had to be done for a tight fit. Installation complete!

Was this instruction helpful to you?

Customer:: Pete from Tracy, MN
Parts Used:: WPW10112253
Difficulty Level:: Really Easy
Total Repair Time:: Less than 15 mins
Tools:: Screw drivers

Plastic worm gear stripped

The plastic worm gear was stripped,I took it apart first then cleaned out all the old grease so when the new part came it together like a charm.

Was this instruction helpful to you?

Customer:: Lawrence from Craryville, NY
Parts Used:: WP9704329
Difficulty Level:: Really Easy
Total Repair Time:: Less than 15 mins

wire whip brokrn

Just screwed it in

Was this instruction helpful to you?

Customer:: Ashok from Sterling, VA
Parts Used:: WPW10112253
Difficulty Level:: Really Easy
Total Repair Time:: 30 - 60 mins
Tools:: Screw drivers

The worm gear was damaged

I how the video for replacing the worm gear on your website. It help me a lot. I followed step by step instruction display on video. It was great help.

Was this instruction helpful to you?

Customer:: Ronald from El Paso, TX
Parts Used:: WP240309-2
Difficulty Level:: Easy
Total Repair Time:: 15 - 30 mins
Tools:: Pliers, Screw drivers

No rotation

I was very happy with the customer services department and the support I received in identifying the part I needed for the repair. I received an email confirming my order with all details. I do wish you had a more cost effective shipping alternative, like Priority mail.
The repair went well and the mixer is back in business, for making those Chocolate Chip Cookie and brownies if you know what I mean.

Thank you
Ron Ashby

Was this instruction helpful to you?

Customer:: Bart from Stuarts Draft, VA
Parts Used:: WP240309-2
Difficulty Level:: Easy
Total Repair Time:: 15 - 30 mins
Tools:: Screw drivers

worm gear replacement

watched instruction video (from Part Select), the demonstration was close enough to enable me to repair the mixer. Newer mixers are disassembled differently.

Was this instruction helpful to you?

9KSM150PSWH5 KitchenAid Mixer - Instructions