GH8155XJZ0 Whirlpool Microwave - Instructions
Jump to:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Glass tray missing and vent grille broken
Replaced the missing tray and unscrewed a couple of screws to remove broken grille tabs and retightened the screws to hold in the new grille. Very successful and very easy. Thanks
Was this instruction helpful to you?
Thank you for voting!
Thought filters should be changed after 5 years of use.
Used hands to slide filters sideways, till they could be pried out with screwdriver or bare hands. When new parts arrived, easily slide new filters into position. In hindsight, we did not need to replace grease filter. I was able to clean one of those with ordinary dish soap, warm water, and a brush.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Shirley from Coconut Creek, FL
- Parts Used:
- 8183948
- Difficulty Level:
- Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Screw drivers
Plastic vent on microwave was cracked and would no longer stay on.
Removed the broken parts and screws and placed the new vent on and tightened screws. I am an 76 year old woman, so if I could do this, then anyone can! Surprisingly easy to install.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- DIANA from BORDEN, IN
- Parts Used:
- 8183851
- Difficulty Level:
- Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Screw drivers
Plastic tabs broke and the grille fell off.
Removed the screws holding the broken tabs and thought the new vent grille would click right into place. I had quite a bit of trouble getting all the tabs lined up to click into place, but was finally able to do it. Then I just used the old screws to secure the new grille.
Was this instruction helpful to you?
Thank you for voting!
Microwave gill fasteners broke and would not stay in place.
Replaced grill and greese and charcoal filters.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Tim from Palm Harbor, FL
- Parts Used:
- 8183948
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
vent grill broken at installation screw
old vent off screwed new in less than a minute
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Debbie from Tucson, AZ
- Parts Used:
- 8183851
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
Vent grille tabs were broken
Replaced it with a new vent grill simply by screwing in on. It works and looks great.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Lori from Sonora, CA
- Parts Used:
- 8183851
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
The Vent grill on my microwave broke
I was in a panic as no one in our twon had this part. I found PartSelect online and ordered the part. I ordered this part at 4PM and the next day at 2PM the part was at my house. My husband spent 30 seconds screwing it back on and it looks like new. I can't say enough wonderful things about your Company and Customer Service!!! You're the BEST!!!
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- kristen from poynette, WI
- Parts Used:
- 8183948
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
plastic holders broke on our vent grille
We took off the old grille - and simply screwed on the new one. Easy peasy.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- WALLEN from Anchorage, AK
- Parts Used:
- 8183948
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
microwave vent grill
I have been doing repair on things on my own for years, I am a retired prevenative maintenace supervisor.
While cleaning the microwave vent grill from being old it fell apart, so I ordered the part using the internet to find the a company that has the same part, the part didnt take long before I recieved it. It didnt take five minutes to install it, and it saved me cash in the pocket from someone else to do the work. wallen
While cleaning the microwave vent grill from being old it fell apart, so I ordered the part using the internet to find the a company that has the same part, the part didnt take long before I recieved it. It didnt take five minutes to install it, and it saved me cash in the pocket from someone else to do the work. wallen
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- James from Anoka, MN
- Parts Used:
- 8183948
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
The top vent grill tabs broke rendering it unusable
I simply removed the original 2 screws for the old grill, attached the new grill, fastened it with the original screws & It fit perfectly in less than 5 minutes time.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- tom from saint james, MN
- Parts Used:
- 8183948
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
broken tabs for the vent cover
I removed the broken tabs with a screwdriver and snaped in the new cover replacing the screws once I had it in place. the entire job took less than 5 min.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Donald from Pompano Beach, FL
- Parts Used:
- 4393799
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
broken
put the turntable in and had a Rum and Coke to celebrate. Your service was GREATTTTTT...
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- barbara from phoenixville, PA
- Parts Used:
- 4393799
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
glass turntable in microwave cracked in half while cooking
submitted manufacturer info to website and voila! a new glass turntable arrived in 2 days. I don't do well with computers, my 23 yr. old daughter was impressed......couldn't be easier! thanx! will definitely revisit your site
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Jaime from Melbourne, FL
- Parts Used:
- 8183948
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
Broken Vent Grill
Removed screws holding tabs from broken vent grill to microwave frame.
Carefully snapped new grill vent into slots on top of microwave and slid tabs into slots on top of the frame.
Replaced the two screws in the tabs.
Finished
Carefully snapped new grill vent into slots on top of microwave and slid tabs into slots on top of the frame.
Replaced the two screws in the tabs.
Finished
Was this instruction helpful to you?
Thank you for voting!