Models > UMV1160CB1 > Instructions

UMV1160CB1 Whirlpool Microwave - Instructions

Jump to:

All Instructions for the UMV1160CB1

Customer:: Gail from Cincinnati, OH
Parts Used:: W11252182
Difficulty Level:: Really Easy
Total Repair Time:: Less than 15 mins

glass turntable broke in half, ring turn needed replaced

I removed the broken tray and ring-turn and replaced it with the new
Service was fantastic, parts were ordered one day and received the next

3 of 4 people found this instruction helpful.

Was this instruction helpful to you?

Customer:: Meghan from WEST JORDAN, UT
Parts Used:: W11367904
Difficulty Level:: Very Easy
Total Repair Time:: Less than 15 mins

I accidentally broke the cook tray.

I ordered a new one then put the new one in the microwave. Easiest fix ever!

3 of 4 people found this instruction helpful.

Was this instruction helpful to you?

Customer:: DAN from CARPENTERSVLE, IL
Parts Used:: 8206232A
Difficulty Level:: Really Easy
Total Repair Time:: 30 - 60 mins

light bulb burnt out .

Turn off power supply at breaker . Replace old bulb with new bulb .

3 of 4 people found this instruction helpful.

Was this instruction helpful to you?

Customer:: Theodore from SEBRING, FL
Parts Used:: W11025649, W10190018
Difficulty Level:: Very Difficult
Total Repair Time:: More than 2 hours

Wrong mounting plate

Two Mounting plates # PS12074431 were sent to me and both do not fit.
Model number MMV1175JZ-0
Serial number TRX-17. 24546
Manufactured April 2020
Contacted Maytag and even sent pictures to show the problem with alignment of the mounting plate not fit in the back of the microwave.

3 of 4 people found this instruction helpful.

Was this instruction helpful to you?

Customer:: William from Hudson, MI
Parts Used:: WPW10156813, WP8206419
Difficulty Level:: A Bit Difficult
Total Repair Time:: More than 2 hours
Tools:: Pliers, Screw drivers

Top support for door switch broke.

Part of the support was missing. I had to remove the two switches and put them in the new bracket
Had the switches reversed and started blowing fuses. Reversed them and changed the fuse and it started working.

3 of 4 people found this instruction helpful.

Was this instruction helpful to you?

Customer:: Pablo from Burlingame, CA
Parts Used:: 8206232A
Difficulty Level:: Really Easy
Total Repair Time:: Less than 15 mins

light bulb burned-out

screwed in new bulb

13 of 34 people found this instruction helpful.

Was this instruction helpful to you?

Customer:: Mark from WEST NYACK, NY
Parts Used:: WPW10466420, W10337248
Difficulty Level:: Really Easy
Total Repair Time:: 30 - 60 mins
Tools:: Screw drivers

Turntable Motor burned out

Unplug microwave
Remove bottom of Microwave with phillips screwdriver.
Remove connecting wires to Motor
Remove Motor (2 Screws) with Torx Wrench.
Transfer seal from old motor to new moter
Re-install motor
Connect wires
Reinstall Bottom of microwave
Plug back into outlet

r

3 of 4 people found this instruction helpful.

Was this instruction helpful to you?

Customer:: Alvin from HILTON HEAD, SC
Parts Used:: 8206232A
Difficulty Level:: Easy
Total Repair Time:: 30 - 60 mins
Tools:: Pliers, Screw drivers

Exterior light bulb (PS2376034) broken off in socket. No access for pliers after glass cover removed.

Unplug appliance. Remove total of 7 phillips screws from sides and front of bottom panel . Panel front drops down, remove one socket screw and socket. Now have access for lineman' s pliers to unscrew bulb base. Reinstall socket, replace bulb and 7 panel screws. Restore power.

3 of 4 people found this instruction helpful.

Was this instruction helpful to you?

Customer:: George from SANFORD, FL
Parts Used:: W11025649, W10821385
Difficulty Level:: Easy
Total Repair Time:: 30 - 60 mins

I had a cabinet person install new kitchen cabinets and counter top. After the demolition of the the old cabinets, I had to buy new parts for the new instal

I had the help of a handyman, I'm 75 years young but not handy with tools

2 of 2 people found this instruction helpful.

Was this instruction helpful to you?

Customer:: Jerry from Pine, CO
Parts Used:: 8206232A
Difficulty Level:: Easy
Total Repair Time:: 15 - 30 mins
Tools:: Pliers, Screw drivers

Replacement of hood light bulbs

Unplug the microwave. Then remove the six screws that hold the lower panel which has the light bulb cover and a couple of vent filters. The light bulb sockets are on a fixture that is connected by a quick connect electrical connector. Disconnect that and the whole panel is free to access the bulbs. My bulbs were very fragile and trying to twist them out resulted in the glass twisitng loose with the base still in the sockets. I needed to use a needle nose pliers to remove the bases and then I replaced the bulbs and put every thing back together

2 of 2 people found this instruction helpful.

Was this instruction helpful to you?

Customer:: Matthew from Cartersville, GA
Parts Used:: W11685613
Difficulty Level:: Really Easy
Total Repair Time:: 15 - 30 mins
Tools:: Screw drivers

Whirlpool Microwave door cracked at bottom

I ordered a new door from PartsSelect and received it in about 7-8 days. Looked at a video on how to replace the door. Replaced the door in about 15 mins. very easy and everything fit perfectly.

2 of 2 people found this instruction helpful.

Was this instruction helpful to you?

Customer:: Theresa from OVERLAND PARK, KS
Parts Used:: 8206232A
Difficulty Level:: Very Easy
Total Repair Time:: Less than 15 mins
Tools:: Screw drivers

Burned out bulb

Husband replaced the bulb

2 of 2 people found this instruction helpful.

Was this instruction helpful to you?

Customer:: Bill from CARBON HILL, AL
Parts Used:: W10337248
Difficulty Level:: Really Easy
Total Repair Time:: Less than 15 mins

Plastic piece that spins turntable failed because of prolonged heat, I suppose.

Just opened the door and dropped in new part and viola!

2 of 2 people found this instruction helpful.

Was this instruction helpful to you?

Customer:: Leon C from MEDFORD, OR
Parts Used:: W11252182
Difficulty Level:: Very Easy
Total Repair Time:: Less than 15 mins

Microwave didn't have support ring when house was purchased.

Removed turntable
Place support ring in track
Place turntable on support ring.
Easy, peasy!

2 of 2 people found this instruction helpful.

Was this instruction helpful to you?

Customer:: DANNY from SAINT JOHNS, FL
Parts Used:: 8206232A
Difficulty Level:: Very Easy
Total Repair Time:: Less than 15 mins
Tools:: Screw drivers

Burned out light in microwave

Spouse just screwed in the new bulb and reinstalled the light cover plate with the two screws. Took under a minute. Works great.

4 of 8 people found this instruction helpful.

Was this instruction helpful to you?

All Instructions for the UMV1160CB1