GH7208XRY4 Whirlpool Microwave - Instructions
Jump to:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- Mike from Candler, NC
- Parts Used:
- 8205992
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Broken glass turntable
The glass turntable from PartSelect.com arrived quickly, on the estimated arrival day, and we were back in business. Thanks
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Patsy from Gloucester, VA
- Parts Used:
- W11661547
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
turntable was making noise
We took out 10 screws on bottom of microwave. Removed turntable motor. Determined motor was bad by turning and listening while it was turned by hand. Bought motor online. 2 days later motor arrived and we installed it...EASY BREEZE Microwave works GREAT....
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Thomas from Venice, FL
- Parts Used:
- 8205994
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Turntable did not revolve
Installed new turntable driver. Very easy to repair
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Dean from Lakewood, CO
- Parts Used:
- 8205994
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
My girlfriend's microwave did not spin anything and didn't cook very well
I opened the door, inserted the part, and automatically became her hero! She even began to sing Bette Midler's Wind Beneath My Wings: "Did you ever know that you're my hero..."
Was this instruction helpful to you?
Thank you for voting!
glass plate broken, turntable driver melter
replaced the above and t. ring, spacer and motor. from underneath the microwave, two screws lets motore drop down, then detach two wires from terminals on moter (be sure to unplug the microwave first) and from insdie the microwave the driver pulls up off the motor shaft easily.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Biviana from Sunrise, FL
- Parts Used:
- 8206123
- Difficulty Level:
- Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Screw drivers
Broken door handle
Remove top and botto screws, then use a butter knife to pull apart the door and remove the handle screws. Replace new handle ,make sure the little plastic ring inside screws are properly place in order to be able to screw the new handle back. And there,you have your new fixed appliance!! Easy cheese! ??
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Bruce from Rock Island, IL
- Parts Used:
- W11661547
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Screw drivers
Noisy turntable motor
Unplug microwave. Remove turntable and support from inside. Remove outside bottom cover (10 screws). Remove 2 torx screws holding motor in place. Remove 2 wires from motor, noting colors. Wires are held with spade connectors that has a small tab that needs to be depressed. Remove washer from motor and place on new motor. Entire procedure very easy.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Dotty from Hillsboro, WI
- Parts Used:
- 8204670
- Difficulty Level:
- A Bit Difficult
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Screw drivers
surface light on microwave wasnt' working
took the light assembly off and replaced the bulb and put the assembly together and fitted back in the space and finished the assembly.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- donald from payson, AZ
- Parts Used:
- W10120840A
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
need new filter
replaced old filter
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Jeff from Hanahan, SC
- Parts Used:
- W10120840A, W10120839A, 8204670
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Nutdriver
Bulb Finally went out
Used an apex bit unscrewed the fittingand down came the light cover. Pulled the old bulb out and had to use a flashlight to line the prongs up to install the new one. Whileeverything was down used an oven cleaner to degrease and clean EVERYTHING. You wouldn't beleive how much grease and debris will accumulate in 5 years. And I only fry bacon once in a blue moon. All in all it was simple to order, clean, and repair.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- JoEllen from Salinas, CA
- Parts Used:
- 8205992
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
I broke the glass turn table tray in my microwave
There was no installation involved. I just placed the new tray in my microwave. What is amazing however, is I ordered my part early one morning, the tray arrived at my door step the next day.I paid for regular shipping. Thanks guys good work
Was this instruction helpful to you?
Thank you for voting!