Models > GH6177XPT4 > Instructions

GH6177XPT4 Whirlpool Microwave - Instructions

Jump to:

All Instructions for the GH6177XPT4

Customer:: Larrt from Minooka, IL
Parts Used:: W10642989
Difficulty Level:: Easy
Total Repair Time:: 15 - 30 mins
Tools:: Screw drivers

Microwave turntable stopped rotating.

1. Unplug the power cord from the wall socket. 2. Remove the 10 screws holding the bottom cabinet cover in place. The bottom cabinet cover will swing down allowing acces to the inside ofe the microwave. 3. Remove the connector from the turntable motor. 4. Use a T15 Torx driver to remove the 2 Torx screws holding the motor in place. 5. Remove the motor. 6. Reverse the process using the new motor.

Was this instruction helpful to you?

Customer:: Dotty from Hillsboro, WI
Parts Used:: 8204670
Difficulty Level:: A Bit Difficult
Total Repair Time:: 15 - 30 mins
Tools:: Screw drivers

surface light on microwave wasnt' working

took the light assembly off and replaced the bulb and put the assembly together and fitted back in the space and finished the assembly.

Was this instruction helpful to you?

Customer:: Sharon from Anoka, MN
Parts Used:: 8204670
Difficulty Level:: A Bit Difficult
Total Repair Time:: Less than 15 mins
Tools:: Screw drivers

burned out overhead light

Some difficulty getting screw loosened, once that was done replaced burned out bulb.

Was this instruction helpful to you?

Customer:: Teresa from Grapevine, TX
Parts Used:: W10450187
Difficulty Level:: Easy
Total Repair Time:: Less than 15 mins

Vent Grille clips broke off

Snap the new one in place.

Was this instruction helpful to you?

Customer:: Jennifer from Red Oak, IA
Parts Used:: 8204670
Difficulty Level:: Easy
Total Repair Time:: Less than 15 mins
Tools:: Screw drivers

Light burned

Unscrewed the lens cover anbd inserted the new bulb. Put the cover back on and there was light!

Was this instruction helpful to you?

Customer:: Kymberly from Beaumont, CA
Parts Used:: W10113040A, W10112514A
Difficulty Level:: Easy
Total Repair Time:: Less than 15 mins

Grease & Fiter vents

I want to thank PartSelect for thier assistance with my grease and filters that were needed for our microwave. We just bought a home and although the appiances are still in good working condition and only 6 years old they have not been maintaned well at all. The filers needed replacing and our local chain of hardware stores do not carry any of the sizes we needed. I went on line and found PartSelect.com and reviewed what they offered. I really could not find what I needed so I called customer service and the women on the other end of the phone went through in great detail as to the sizes and quantities I would need. I have since then received the filters and they were extremely easy to install and fit perfectly. Very helpful site. KDS

Was this instruction helpful to you?

Customer:: Eugenio from San Jose, CA
Parts Used:: W10450172
Difficulty Level:: Easy
Total Repair Time:: Less than 15 mins
Tools:: Screw drivers

broken clips and plastic pieces holding tabs

The only to repair the vent grill was to purchase a new one. I went ahead and found a the replacement part and waited 5 days when it arrived. Very easy installation. Ijust lined it uap amd popped it in place. With a screwdriver I made sure to extend the clips slightly to ensure they fit snuggly to ensure they held the vent tightly

Was this instruction helpful to you?

Customer:: Charlotte from White House, TN
Parts Used:: W10450187
Difficulty Level:: Really Easy
Total Repair Time:: Less than 15 mins

Broken Vent/Grill cover

Received new cover the next day. Snapped new cover in place with no problems.

Was this instruction helpful to you?

Customer:: Amber from Loretto, PA
Parts Used:: 4393799
Difficulty Level:: Really Easy
Total Repair Time:: Less than 15 mins

The glass tray in the microwave got chipped while i was washing it and started to crack.

I just opened the box and set it in. Took all of two minutes.

Was this instruction helpful to you?

Customer:: George from Statham, GA
Parts Used:: 4393799
Difficulty Level:: Really Easy
Total Repair Time:: Less than 15 mins

Replacement

Easy, perfect

Was this instruction helpful to you?

Customer:: Michael from Fallon, NV
Parts Used:: W10450189
Difficulty Level:: Really Easy
Total Repair Time:: Less than 15 mins
Tools:: Screw drivers

Original Vent Fell Off ! Clip Screw Mounts Simply Broke.

Attached additional 3rd clip using phillips screwdriver, snapped vent into place. That's it. Addionally, I ordered the piece (at roughly one third price of factory) on thursday, it arrived saturday !! Excellent !!

Was this instruction helpful to you?

Customer:: Joseph from York, ME
Parts Used:: W10450187
Difficulty Level:: Really Easy
Total Repair Time:: Less than 15 mins
Tools:: Screw drivers

Broken clip holder

Remove broken grille and snapped new grille in place. Very easy to do. Very poor design by Whirlpool. This is my third grille in 4 years. Thank you PartSelect for carrying the replacement grilles.

Was this instruction helpful to you?

Customer:: william from surprise, AZ
Parts Used:: W10450189
Difficulty Level:: Really Easy
Total Repair Time:: Less than 15 mins

vent grille fell off and broke.

Easy order for new replacement grill. Easy to pop it right back on.

Was this instruction helpful to you?

Customer:: issac from hallandale bch, FL
Parts Used:: W10450189
Difficulty Level:: Really Easy
Total Repair Time:: Less than 15 mins

vent grill was broke

just snap in to the place very easy

Was this instruction helpful to you?

Customer:: Tessa from Oakton, VA
Parts Used:: W10450189
Difficulty Level:: Really Easy
Total Repair Time:: Less than 15 mins

Vent Grille clips broken

Opened the box, took the new part out and snapped it on. Easy. Fit perfectly. Took less than 2 minutes. Looks great!

Was this instruction helpful to you?

All Instructions for the GH6177XPT4