Models > IBMS1455VS0 > Instructions

IBMS1455VS0 Whirlpool Microwave - Instructions

Jump to:

All Instructions for the IBMS1455VS0
16 - 30 of 39
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Customer:
Jeff from Baytown, TX
Parts Used:
W11373838
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
I broke the glass cooking tray when instaling my oven microwave combo
I put the tray in the microwave???? Pretty easy.
2 of 4 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
jeff from las vegas, NV
Parts Used:
W11110134
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
replace spindle on turning table
exact part in with the new out with the old
1 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
David from Oxnard, CA
Parts Used:
W11373838
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Broken cooking tray
Replaced the glass tray
1 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Carol from Phoenix, AZ
Parts Used:
W11373838
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
glass tray missing
found the part no. and ordered it. it was delivered fast and efficient.
tracking was also helpful.
thanks
1 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Michael from Ladson, SC
Parts Used:
W11193483
Difficulty Level:
Difficult
Total Repair Time:
More than 2 hours
Tools:
Screw drivers
The light in our microwave was out.
We had to remove screws from the vent covers above and below the microwave, then there were 2 screws (one on each side) that attached the microwave to the oven. Once all of the screws were removed we had to pull the microwave out. Then we pulled the light cord out, removed the burnt out light and installed the new one. Then reversed the steps.
1 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Kerry from Carrollton, TX
Parts Used:
W10915651
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Part worn out
Could not complete the repair due to broken part when arrived. Reached out to service department but have not heard back. Maybe email did not go through due to pictures attached of part condition once arrived.
1 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Navid from Dunn Loring, VA
Parts Used:
W11373838
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Microwave cooking glass broken
Easily replaced after received the product from Part Select. Very satisfied.
1 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Raymond from HINSDALE, IL
Parts Used:
W11373838
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Old microwave glass tray shattered while warming a hard-boiled egg.
I took the new tray out of the box and placed it in the microwave oven.. No tools needed.
1 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Janet from Concord, CA
Parts Used:
W11373838
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
broken glass dish for microwave
no repair needed - ordered part, came within 3 days - very satisfied
1 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Michael from Kansas City, MO
Parts Used:
W11373838
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Broken Cook tray
Well the repair went Ok. The probelm happen on the following Monday. You see I ordered this part over the phone because I had to make sure it would arrive in time for Thanksgiving.
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Karen from Southampton, NY
Parts Used:
W11116990, W11086664
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
Button broken
Had to remove microwave from wall and place it on a table to remove metal casement. Small hands would be great to do this job. Needed to pull terminal plug to acquire more space. Otherwise worked well.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Paula from Warren, OR
Parts Used:
W11373838
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
I chipped the edge of the glass cooking tray.
Ordered a new cooking tray and it was shipped within two hours. Packaging was excellent and well protected.
Was this instruction helpful to you?
Thank you for voting!
Customer:
nana from pembroke pines, FL
Parts Used:
WPW10120220
Difficulty Level:
A Bit Difficult
Total Repair Time:
1- 2 hours
Tools:
Nutdriver, Screw drivers
Breaker Tripped, Puff Of Smoke From Unit
Removed built in unit from cabinet and looked for faulted component spied burnt spot where filter went to ground on frame removed and matched part on manufacts web page. .
Was this instruction helpful to you?
Thank you for voting!
Customer:
Ken R from Eagan, MN
Parts Used:
WPW10124269
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Screw drivers
LCD display lost some lighted bars that form the numbers
Removed microwave from wall (it is a built-in). Removed top of cover. Removed 4 screws that held the front panel. Pulled front panel out. Unclipped LED Display from holder. Unplugged the 2 flat cables. Removed old Display. Inserted new Display. Clipped Display in place. Plugged the 2 cables. Reinstalled front panel. Reinstalled cover. Plugged into outlet and tried it out. Viola! Reinstalled into wall.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Curtis from San Jose, CA
Parts Used:
W11223840
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
The shaft on the turntable drive coupler was longer than the original one that was broken..
All other measurements were similar and fit properly. The drive shaft of the coupler was TOO long by about 3/16". I had to cut it down to the size of the original OEM shaft using a fine cut hack saw. Seems to work perfectly now....
Was this instruction helpful to you?
Thank you for voting!
All Instructions for the IBMS1455VS0
16 - 30 of 39