Models > MH9180XLT0 > Instructions

MH9180XLT0 Whirlpool Microwave - Instructions

Jump to:

All Instructions for the MH9180XLT0

Customer:: Paul from Norristown, PA
Parts Used:: 8206232A
Difficulty Level:: Really Easy
Total Repair Time:: Less than 15 mins
Tools:: Screw drivers

Burned out lightbulb

First let me say that I tried several places to get what I thought was a simple light bulb. This included several national hardware stores as well as a national electrical supply company. No luck. Went to the manual and PartSelect. Not only did you have it in stock, ship right away,at a reasonable price it arrived in a matter of days. One would not normally think of receiving a "how to" video to change a light bulb but you did. That impressed me. Suffice to say the replacement went well and you can be certain the next time I need a part I will go to you first. I am also impressed with the organizations with which you are affiliated with. BBB, Norton, PayPal, money back guarantee etc. Thank You The entire process was made pleasant with your support.

Was this instruction helpful to you?

Customer:: Larrt from Minooka, IL
Parts Used:: W10642989
Difficulty Level:: Easy
Total Repair Time:: 15 - 30 mins
Tools:: Screw drivers

Microwave turntable stopped rotating.

1. Unplug the power cord from the wall socket. 2. Remove the 10 screws holding the bottom cabinet cover in place. The bottom cabinet cover will swing down allowing acces to the inside ofe the microwave. 3. Remove the connector from the turntable motor. 4. Use a T15 Torx driver to remove the 2 Torx screws holding the motor in place. 5. Remove the motor. 6. Reverse the process using the new motor.

Was this instruction helpful to you?

Customer:: joshua from las vegas, NV
Parts Used:: W10189669
Difficulty Level:: A Bit Difficult
Total Repair Time:: 30 - 60 mins
Tools:: Nutdriver, Screw drivers, Socket set, Wrench set

Door would not shut

Had to replace 1 latch in order for the microwave door to close.

Was this instruction helpful to you?

Customer:: William from Huntington Beach, CA
Parts Used:: 8184581
Difficulty Level:: Easy
Total Repair Time:: 1- 2 hours
Tools:: Pliers, Screw drivers

Microwave was making a grinding sound

Problem was easily diagnosed using the internet as a resource, problem was a bad stirrer motor. Hardest part of the repair was the removal of the microwave. Once off the wall, you remove the outer cover and a molded plastic casing directly underneath the outer cover at the top of hte microwave to expose the stirrer motor. Removed two screws and two wires and the old motor is out. Did exactly the opposite to install the new motor. The kit I recvd included among other things the motor, a new inside cover, plastic rivets and even silicone to seal the inside cover. I am sure I saved a couple hundred dollars by doing myself.

Was this instruction helpful to you?

Customer:: Ferol from San Antonio, TX
Parts Used:: 8206232A
Difficulty Level:: Really Easy
Total Repair Time:: 15 - 30 mins
Tools:: Screw drivers

2 burned out bulbs under the microwave/important light source for kitchen stove.

I didn't do the repair -- my husband did, said it was easy, had no problems what so ever! The new bulbs give a lot more light to the cooking area.

Was this instruction helpful to you?

Customer:: JASON from ABSECON, NJ
Parts Used:: 4393799
Difficulty Level:: Really Easy
Total Repair Time:: Less than 15 mins

Broken plate

Took the replacement plate out of the box and put it in the microwave in seconds. I never realized how much of a difference having the correct microwave plate would make. It's great to have it back.

Was this instruction helpful to you?

Customer:: Stephanie from La Jolla, CA
Parts Used:: 4393799
Difficulty Level:: Really Easy
Total Repair Time:: Less than 15 mins

Broke a 15 year old glass cooking tray

Ordered the item on a Monday at 12pm and it arrived the next day. Amazing!

Was this instruction helpful to you?

All Instructions for the MH9180XLT0